# HG changeset patch # User Sebastien Decugis # Date 1318572934 -7200 # Node ID 26b5748a6b700bfcf46853e23b9bbf25e13fb8f0 # Parent 513edd0d31b99710200f94519d97ba61ee5487cf Added contribution from Norberto, many thanks diff -r 513edd0d31b9 -r 26b5748a6b70 contrib/CxDx/README --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/contrib/CxDx/README Fri Oct 14 08:15:34 2011 +0200 @@ -0,0 +1,17 @@ +Date: Thu, 13 Oct 2011 14:01:40 -0300 +From: "Norberto R. de Goes Jr." +To: help@freediameter.net +Subject: [Help] Cx dictionary (samples "c" and "xml") + +Hi. + +Just a contribution, they were not tested. +Best regards, + +-- +Norberto R. de Goes Jr. +CPqD - DRC +Tel.: +55 19 3705-4241 / Fax: +55 19 3705-6125 +norberto@cpqd.com.br +www.cpqd.com.br + diff -r 513edd0d31b9 -r 26b5748a6b70 contrib/CxDx/dict_cxdx.c --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/contrib/CxDx/dict_cxdx.c Fri Oct 14 08:15:34 2011 +0200 @@ -0,0 +1,1724 @@ +/********************************************************************************************************* + * Software License Agreement (BSD License) * + * Author: Norberto R. de Goes Jr. * + * * + * Copyright (c) 2011, Norberto R. de Goes Jr.. * + * * + * All rights reserved. * + * * + * Redistribution and use of this software in source and binary forms, with or without modification, are * + * permitted provided that the following conditions are met: * + * * + * * Redistributions of source code must retain the above * + * copyright notice, this list of conditions and the * + * following disclaimer. * + * * + * * Redistributions in binary form must reproduce the above * + * copyright notice, this list of conditions and the * + * following disclaimer in the documentation and/or other * + * materials provided with the distribution. * + * * + * * Neither the name of the Teraoka Laboratory nor the * + * names of its contributors may be used to endorse or * + * promote products derived from this software without * + * specific prior written permission of Teraoka Laboratory * + * * + * * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED * + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A * + * PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR * + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT * + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR * + * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF * + * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * + *********************************************************************************************************/ + + +/********************************************************************************************************* + + === CpqD/DRC - Projeto ADRIMS - Mar/2011 === + === Dicionario Dx/Cx === + Baseado no "dict_sip" do FreeDiameter (www.freediameter.net) + Norberto R Goes Jr +*********************************************************************************************************/ + + +#include + + + +/* The content of this file follows the same structure as dict_base_proto.c */ + +#define CHECK_dict_new( _type, _data, _parent, _ref ) \ + CHECK_FCT( fd_dict_new( fd_g_config->cnf_dict, (_type), (_data), (_parent), (_ref)) ); + +#define CHECK_dict_search( _type, _criteria, _what, _result ) \ + CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, (_type), (_criteria), (_what), (_result), ENOENT) ); + + +struct local_rules_definition +{ + char *avp_name; + enum rule_position position; + int min; + int max; +}; + +/*==================================================================*/ + +#define RULE_ORDER( _position ) ((((_position) == RULE_FIXED_HEAD) || ((_position) == RULE_FIXED_TAIL)) ? 1 : 0 ) + +/*==================================================================*/ + +#define PARSE_loc_rules( _rulearray, _parent, _avp_search_flag) { \ + int __ar; \ + for (__ar=0; __ar < sizeof(_rulearray) / sizeof((_rulearray)[0]); __ar++) { \ + struct dict_rule_data __data = { NULL, \ + (_rulearray)[__ar].position, \ + 0, \ + (_rulearray)[__ar].min, \ + (_rulearray)[__ar].max}; \ + __data.rule_order = RULE_ORDER(__data.rule_position); \ + \ + CHECK_FCT( fd_dict_search( \ + fd_g_config->cnf_dict, \ + DICT_AVP, \ + _avp_search_flag, \ + (_rulearray)[__ar].avp_name, \ + &__data.rule_avp, 0 ) ); \ + if ( !__data.rule_avp ) { \ + TRACE_DEBUG(INFO, "AVP Not found: '%s'", (_rulearray)[__ar].avp_name ); \ + return ENOENT; \ + } \ + \ + CHECK_FCT_DO( fd_dict_new( fd_g_config->cnf_dict, DICT_RULE, &__data, _parent, NULL), \ + { \ + TRACE_DEBUG(INFO, "Error on rule with AVP '%s'", \ + (_rulearray)[__ar].avp_name ); \ + return EINVAL; \ + } ); \ + } \ + } + +#define enumval_def_u32( _val_, _str_ ) \ + { _str_, { .u32 = _val_ }} + +#define enumval_def_os( _len_, _val_, _str_ ) \ + { _str_, { .os = { .data = (unsigned char *)_val_, .len = _len_ }}} + + +/*==================================================================*/ +/*==================================================================*/ +/*==================================================================*/ +/*==================================================================*/ + +int cxdx_dict_init(char * conffile) +{ + +#define VENDOR_3GPP_Id 10415 + + + struct dict_object * vendor_dict; + { + struct dict_vendor_data vendor_data = { VENDOR_3GPP_Id, "3GPP" }; + CHECK_dict_new (DICT_VENDOR, &vendor_data, NULL, &vendor_dict); + } + + + struct dict_object * cxdx_dict; + { + struct dict_application_data data = { 16777216 /* NRGJ */, "Diameter CxDx Application" }; + CHECK_dict_new (DICT_APPLICATION, &data, vendor_dict, &cxdx_dict); + } + + + /* ##### AVP section #################################### */ + { + struct dict_object * UTF8String_type; + struct dict_object * DiameterURI_type; + + CHECK_dict_search( DICT_TYPE, TYPE_BY_NAME, "UTF8String", &UTF8String_type); + CHECK_dict_search( DICT_TYPE, TYPE_BY_NAME, "DiameterURI", &DiameterURI_type); + + /* Digest AVPs: */ + + /* Visited-Network-Identifier */ + { + struct dict_avp_data data = + { + 600, /* Code */ + VENDOR_3GPP_Id, /* Vendor */ + "Visited-Network-Identifier", /* Name */ + AVP_FLAG_MANDATORY | AVP_FLAG_VENDOR, /* Fixed flags */ + AVP_FLAG_MANDATORY | AVP_FLAG_VENDOR, /* Fixed flag values */ + AVP_TYPE_OCTETSTRING /* base type of data */ + }; + CHECK_dict_new( DICT_AVP, &data , UTF8String_type, NULL); + } + + /* Public-Identity */ + { + struct dict_avp_data data = + { + 601, /* Code */ + VENDOR_3GPP_Id, /* Vendor */ + "Public-Identity", /* Name */ + AVP_FLAG_MANDATORY | AVP_FLAG_VENDOR, /* Fixed flags */ + AVP_FLAG_MANDATORY | AVP_FLAG_VENDOR, /* Fixed flag values */ + AVP_TYPE_OCTETSTRING /* base type of data */ + }; + CHECK_dict_new( DICT_AVP, &data , UTF8String_type, NULL); + } + + + /* Server-Name */ + { + struct dict_avp_data data = + { + 602, /* Code */ + VENDOR_3GPP_Id, /* Vendor */ + "Server-Name", /* Name */ + AVP_FLAG_MANDATORY | AVP_FLAG_VENDOR, /* Fixed flags */ + AVP_FLAG_MANDATORY | AVP_FLAG_VENDOR, /* Fixed flag values */ + AVP_TYPE_OCTETSTRING /* base type of data */ + }; + CHECK_dict_new( DICT_AVP, &data , DiameterURI_type/*UTF8String_type*/, NULL); + } + + + /* Optional-Capability */ + { + struct dict_avp_data data = + { + 605, /* Code */ + VENDOR_3GPP_Id, /* Vendor */ + "Optional-Capability", /* Name */ + AVP_FLAG_MANDATORY | AVP_FLAG_VENDOR, /* Fixed flags */ + AVP_FLAG_MANDATORY | AVP_FLAG_VENDOR, /* Fixed flag values */ + AVP_TYPE_UNSIGNED32 /* base type of data */ + }; + CHECK_dict_new( DICT_AVP, &data , NULL, NULL); + } + + + /* Feature-List-ID */ + { + struct dict_avp_data data = + { + 629, /* Code */ + VENDOR_3GPP_Id, /* Vendor */ + "Feature-List-ID", /* Name */ + AVP_FLAG_VENDOR, /* Fixed flags */ + AVP_FLAG_VENDOR, /* Fixed flag values */ + AVP_TYPE_UNSIGNED32 /* base type of data */ + }; + CHECK_dict_new( DICT_AVP, &data , NULL, NULL); + } + + + /* Feature-List */ + { + struct dict_avp_data data = + { + 630, /* Code */ + VENDOR_3GPP_Id, /* Vendor */ + "Feature-List", /* Name */ + AVP_FLAG_VENDOR | AVP_FLAG_MANDATORY, /* Fixed flags */ + AVP_FLAG_MANDATORY, /* Fixed flag values */ + AVP_TYPE_UNSIGNED32 /* base type of data */ + }; + CHECK_dict_new( DICT_AVP, &data , NULL, NULL); + } + + /* Server-Capabilities */ + { + struct dict_object * avp; + struct dict_avp_data data = + { + 603, /* Code */ + VENDOR_3GPP_Id, /* Vendor */ + "Server-Capabilities", /* Name */ + AVP_FLAG_MANDATORY | AVP_FLAG_VENDOR, /* Fixed flags */ + AVP_FLAG_MANDATORY | AVP_FLAG_VENDOR, /* Fixed flag values */ + AVP_TYPE_GROUPED /* base type of data */ + }; + + struct local_rules_definition rules[] = + { + { "Vendor-Id", RULE_REQUIRED, -1, 1 }, + { "Feature-List-ID", RULE_REQUIRED, -1, 1 }, + { "Feature-List", RULE_REQUIRED, -1, 1 } + }; + + CHECK_dict_new (DICT_AVP, &data , NULL, &avp); + PARSE_loc_rules(rules, avp, AVP_BY_NAME_ALL_VENDORS ); + } + + + + /* User-Authorization-Type */ + { + struct dict_avp_data data = + { + 623, /* Code */ + VENDOR_3GPP_Id, /* Vendor */ + "User-Authorization-Type", /* Name */ + AVP_FLAG_MANDATORY | AVP_FLAG_VENDOR, /* Fixed flags */ + AVP_FLAG_MANDATORY | AVP_FLAG_VENDOR, /* Fixed flag values */ + AVP_TYPE_OCTETSTRING /* base type of data */ + }; + CHECK_dict_new( DICT_AVP, &data , UTF8String_type, NULL); + } + + + /* Supported-Features */ + { + struct dict_object * avp; + struct dict_avp_data data = + { + 628, /* Code */ + VENDOR_3GPP_Id, /* Vendor */ + "Supported-Features", /* Name */ + AVP_FLAG_VENDOR | AVP_FLAG_MANDATORY, /* Fixed flags */ + AVP_FLAG_MANDATORY, /* Fixed flag values */ + AVP_TYPE_GROUPED /* base type of data */ + }; + + struct local_rules_definition rules[] = + { + { "Vendor-Id", RULE_REQUIRED, -1, 1 }, + { "Feature-List-ID", RULE_REQUIRED, -1, 1 }, + { "Feature-List", RULE_REQUIRED, -1, 1 } + }; + + CHECK_dict_new (DICT_AVP, &data , NULL, &avp); + PARSE_loc_rules(rules, avp, AVP_BY_NAME_ALL_VENDORS ); + } + + + + + } /* end AVP section */ + + + + /* ### Command section ############################# */ + { + /* User-Authorization-Request (UAR) Command */ + { + /* + The User-Authorization-Request (UAR) is indicated by the Command-Code + set to 283 and the Command Flags' 'R' bit set. The Diameter client + in a SIP server sends this command to the Diameter server to request + authorization for the SIP User Agent to route a SIP REGISTER request. + Because the SIP REGISTER request implicitly carries a permission to + bind an AOR to a contact address, the Diameter client uses the + Diameter UAR as a first authorization request towards the Diameter + server to authorize the registration. For instance, the Diameter + server can verify that the AOR is a legitimate user of the realm. + + The Diameter client in the SIP server requests authorization for one + of the possible values defined in the SIP-User-Authorization-Type AVP + (Section 9.10). + + The user name used for authentication of the user is conveyed in a + User-Name AVP (defined in the Diameter base protocol, RFC 3588 + [RFC3588]). The location of the authentication user name in the SIP + REGISTER request varies depending on the authentication mechanism. + When the authentication mechanism is HTTP Digest as defined in RFC + 2617 [RFC2617], the authentication user name is found in the + "username" directive of the SIP Authorization header field value. + This Diameter SIP application only provides support for HTTP Digest + authentication in SIP; other authentication mechanisms are not + currently supported. + + The SIP or SIPS URI to be registered is conveyed in the SIP-AOR AVP + (Section 9.8). Typically this SIP or SIPS URI is found in the To + header field value of the SIP REGISTER request that triggered the + Diameter UAR message. + + The SIP-Visited-Network-Id AVP indicates the network that is + providing SIP services (e.g., SIP proxy functionality or any other + kind of services) to the SIP User Agent. + + The Message Format of the UAR command is as follows: + + + < UAR> ::=< Diameter Header: 300, REQ, PXY, 16777216 > + < Session-Id > + { Vendor-Specific-Application-Id } + { Auth-Session-State } + { Origin-Host } + { Origin-Realm } + [ Destination-Host ] + { Destination-Realm } + { User-Name } + *[ Supported-Features ] + { Public-Identity } + { Visited-Network-Identifier } + [ User-Authorization-Type ] + [ UAR-Flags ] + *[ AVP ] + *[ Proxy-Info ] + *[ Route-Record ] + */ + + struct dict_object * cmd; + struct dict_cmd_data data = + { + 300, /* Code */ + "User-Authorization-Request", /* Name */ + CMD_FLAG_REQUEST | CMD_FLAG_PROXIABLE | CMD_FLAG_ERROR, /* Fixed flags */ + CMD_FLAG_REQUEST | CMD_FLAG_PROXIABLE /* Fixed flag values */ + }; + + struct local_rules_definition rules[] = + { + { "Session-Id", RULE_FIXED_HEAD, -1, 1 }, + { "Vendor-Specific-Application-Id", RULE_REQUIRED, -1, 1 }, + { "Auth-Session-State", RULE_REQUIRED, -1, 1 }, + { "Origin-Host", RULE_REQUIRED, -1, 1 }, + { "Origin-Realm", RULE_REQUIRED, -1, 1 }, + // { "Destination-Host", RULE_OPTIONAL, -1, 1 }, + { "Destination-Realm", RULE_REQUIRED, -1, 1 }, + { "User-Name", RULE_REQUIRED, -1, 1 }, + // { "Supported-Features", RULE_OPTIONAL, -1, -1 }, + { "Public-Identity", RULE_REQUIRED, -1, 1 }, + { "Visited-Network-Identifier", RULE_REQUIRED, -1, 1 }, + // { "UAR-Flags", RULE_OPTIONAL, -1, 1 }, + // { "User-Authorization-Type", RULE_OPTIONAL, -1, 1 }, + // { "Proxy-Info", RULE_OPTIONAL, -1, -1 }, + // { "Route-Record", RULE_OPTIONAL, -1, -1 } + }; + + CHECK_dict_new( DICT_COMMAND, &data , cxdx_dict, &cmd); + PARSE_loc_rules( rules, cmd, AVP_BY_NAME_ALL_VENDORS); + } + + /* User-Authorization-Answer (UAA) Command */ + { + /* + The User-Authorization-Answer (UAA) is indicated by the Command-Code + set to 283 and the Command Flags' 'R' bit cleared. The Diameter + server sends this command in response to a previously received + Diameter User-Authorization-Request (UAR) command. The Diameter + server indicates the result of the requested registration + authorization. Additionally, the Diameter server may indicate a + collection of SIP capabilities that assists the Diameter client to + select a SIP proxy to the AOR under registration. + + + In addition to the values already defined in RFC 3588 [RFC3588], the + Result-Code AVP may contain one of the values defined in + Section 10.1. + + Whenever the Diameter server fails to process the Diameter UAR + message, it MUST stop processing and return the relevant error in the + Diameter UAA message. When there is success in the process, the + Diameter server MUST set the code to DIAMETER_SUCCESS in the Diameter + UAA message. + + If the Diameter server requires a User-Name AVP value to process the + Diameter UAR request, but the Diameter UAR message did not contain a + User-Name AVP value, the Diameter server MUST set the Result-Code AVP + value to DIAMETER_USER_NAME_REQUIRED (see Section 10.1.2) and return + it in a Diameter UAA message. Upon reception of this Diameter UAA + message with the Result-Code AVP value set to + DIAMETER_USER_NAME_REQUIRED, the SIP server typically requests + authentication by sending a SIP 401 (Unauthorized) or SIP 407 (Proxy + Authentication Required) response back to the originator. + + When the authorization procedure succeeds, the Diameter server + constructs a User-Authorization-Answer (UAA) message that MUST + include (1) the address of the SIP server already assigned to the + user name, (2) the capabilities needed by the SIP server (Diameter + client) to select another SIP server for the user, or (3) a + combination of the previous two options. + + If the Diameter server is already aware of a SIP server allocated to + the user, the Diameter UAA message contains the address of that SIP + server. + + The Diameter UAA message contains the capabilities required by a SIP + server to trigger and execute services. It is required that these + capabilities are present in the Diameter UAA message due to the + possibility that the Diameter client (in the SIP server) allocates a + different SIP server to trigger and execute services for that + particular user. + + If a User-Name AVP is present in the Diameter UAR message, then the + Diameter server MUST verify the existence of the user in the realm, + i.e., the User-Name AVP value is a valid user within that realm. If + the Diameter server does not recognize the user name received in the + User-Name AVP, the Diameter server MUST build a Diameter User- + Authorization-Answer (UAA) message and MUST set the Result-Code AVP + to DIAMETER_ERROR_USER_UNKNOWN. + + + If a User-Name AVP is present in the Diameter UAR message, then the + Diameter server MUST authorize that User-Name AVP value is able to + register the SIP or SIPS URI included in the SIP-AOR AVP. If this + authorization fails, the Diameter server must set the Result-Code AVP + to DIAMETER_ERROR_IDENTITIES_DONT_MATCH and send it in a Diameter + User-Authorization-Answer (UAA) message. + + Note: Correlation between User-Name and SIP-AOR AVP values is + required in order to avoid registration of a SIP-AOR allocated to + another user. + + If there is a SIP-Visited-Network-Id AVP in the Diameter UAR message, + and the SIP-User-Authorization-Type AVP value received in the + Diameter UAR message is set to REGISTRATION or REGISTRATION& + CAPABILITIES, then the Diameter server SHOULD verify whether the user + is allowed to roam into the network specified in the + SIP-Visited-Network-Id AVP in the Diameter UAR message. If the user + is not allowed to roam into that network, the Diameter AAA server + MUST set the Result-Code AVP value in the Diameter UAA message to + DIAMETER_ERROR_ROAMING_NOT_ALLOWED. + + If the SIP-User-Authorization-Type AVP value received in the Diameter + UAR message is set to REGISTRATION or REGISTRATION&CAPABILITIES, then + the Diameter server SHOULD verify whether the SIP-AOR AVP value is + authorized to register in the Home Realm. Where the SIP AOR is not + authorized to register in the Home Realm, the Diameter server MUST + set the Result-Code AVP to DIAMETER_AUTHORIZATION_REJECTED and send + it in a Diameter UAA message. + + When the SIP-User-Authorization-Type AVP is not present in the + Diameter UAR message, or when it is present and its value is set to + REGISTRATION, then: + + o If the Diameter server is not aware of any previous registration + of the user name (including registrations of other SIP AORs + allocated to the same user name), then the Diameter server does + not know of any SIP server allocated to the user. In this case, + the Diameter server MUST set the Result-Code AVP value to + DIAMETER_FIRST_REGISTRATION in the Diameter UAA message, and the + Diameter server SHOULD include the required SIP server + capabilities in the SIP-Server-Capabilities AVP value in the + Diameter UAA message. The SIP-Server-Capabilities AVP assists the + Diameter client (SIP server) to select an appropriate SIP server + for the user, according to the required capabilities. + + o In some cases, the Diameter server is aware of a previously + assigned SIP server for the same or different SIP AORs allocated + to the same user name. In these cases, re-assignment of a new SIP + server may or may not be needed, depending on the capabilities of + the SIP server. The Diameter server MUST always include the + allocated SIP server URI in the SIP-Server-URI AVP of the UAA + message. If the Diameter server does not return the SIP + capabilities, the Diameter server MUST set the Result-Code AVP in + the Diameter UAA message to DIAMETER_SUBSEQUENT_REGISTRATION. + Otherwise (i.e., if the Diameter server includes a + SIP-Server-Capabilities AVP), then the Diameter server MUST set + the Result-Code AVP in the Diameter UAA message to + DIAMETER_SERVER_SELECTION. Then the Diameter client determines, + based on the received information, whether it needs to select a + new SIP server. + + When the SIP-User-Authorization-Type AVP value received in the + Diameter UAR message is set to REGISTRATION&CAPABILITIES, then + Diameter Server MUST return the list of capabilities in the + SIP-Server-Capabilities AVP value of the Diameter UAA message, it + MUST set the Result-Code to DIAMETER_SUCCESS, and it MUST NOT return + a SIP-Server-URI AVP. The SIP-Server-Capabilities AVP enables the + SIP server (Diameter client) to select another appropriate SIP server + for invoking and executing services for the user, depending on the + required capabilities. The Diameter server MAY leave the list of + capabilities empty to indicate that any SIP server can be selected. + + When the SIP-User-Authorization-Type AVP value received in the + Diameter UAR message is set to DEREGISTRATION, then: + + o If the Diameter server is aware of a SIP server assigned to the + SIP AOR under deregistration, the Diameter server MUST set the + Result-Code AVP to DIAMETER_SUCCESS and MUST set the + SIP-Server-URI AVP value to the known SIP server, and return them + in the Diameter UAA message. + + o If the Diameter server is not aware of a SIP server assigned to + the SIP AOR under deregistration, then the Diameter server MUST + set the Result-Code AVP in the Diameter UAA message to + DIAMETER_ERROR_IDENTITY_NOT_REGISTERED. + + The Message Format of the UAA command is as follows: + + ::= < Diameter Header: 283, PXY > + < Session-Id > + { Auth-Application-Id } + { Auth-Session-State } + { Result-Code } + { Origin-Host } + { Origin-Realm } + [ SIP-Server-URI ] + [ SIP-Server-Capabilities ] + [ Authorization-Lifetime ] + [ Auth-Grace-Period ] + [ Redirect-Host ] + [ Redirect-Host-Usage ] + [ Redirect-Max-Cache-Time ] + * [ Proxy-Info ] + * [ Route-Record ] + * [ AVP ] + + + */ + struct dict_object * cmd; + struct dict_cmd_data data = + { + 300, /* Code */ + "User-Authorization-Answer", /* Name */ + CMD_FLAG_REQUEST | CMD_FLAG_PROXIABLE | CMD_FLAG_ERROR, /* Fixed flags */ + CMD_FLAG_PROXIABLE /* Fixed flag values */ + }; + + struct local_rules_definition rules[] = + { + { "Session-Id", RULE_FIXED_HEAD, -1, 1 }, + { "Auth-Application-Id", RULE_REQUIRED, -1, 1 }, + { "Auth-Session-State", RULE_REQUIRED, -1, 1 }, + { "Result-Code", RULE_REQUIRED, -1, 1 }, + { "Origin-Host", RULE_REQUIRED, -1, 1 }, + { "Origin-Realm", RULE_REQUIRED, -1, 1 }, + { "Proxy-Info", RULE_OPTIONAL, -1, -1 }, + { "Route-Record", RULE_OPTIONAL, -1, -1 } + }; + + CHECK_dict_new( DICT_COMMAND, &data , cxdx_dict, &cmd); + PARSE_loc_rules( rules, cmd, AVP_BY_NAME ); + } + + + + + +#if 0 /* TODO - NRGJ : alterar conforme RFC-3GPP : */ + + /* Multimedia-Auth-Request (MAR) Command */ + { + /* + The Multimedia-Auth-Request (MAR) command is indicated by the + Command-Code set to 286 and the Command Flags' 'R' bit set. The + Diameter client in a SIP server sends this command to the Diameter + server to request that the Diameter server authenticate and authorize + a user attempt to use some SIP service (in this context, SIP service + can be something as simple as a SIP subscription or using the proxy + services for a SIP request). + + The MAR command may also register the SIP server's own URI to the + Diameter server, so that future LIR/LIA messages can return this URI. + If the SIP server is acting as a SIP registrar (see examples in + Sections 6.2 and 6.3), its Diameter client MUST include a SIP- + Server-URI AVP in the MAR command. In any other cases (see example + in Section 6.4), its Diameter client MUST NOT include a SIP-Server- + URI AVP in the MAR command. + + The SIP-Method AVP MUST include the SIP method name of the SIP + request that triggered this Diameter MAR message. The Diameter + server can use this AVP to authorize some SIP requests depending on + the method. + + The Diameter MAR message MUST include a SIP-AOR AVP. The SIP-AOR AVP + indicates the target of the SIP request. The value of the AVP is + extracted from different places in SIP request, depending on the + semantics of the SIP request. For SIP REGISTER messages the SIP-AOR + AVP value indicates the intended public user identity under + registration, and it is the SIP or SIPS URI populated in the To + header field value (addr-spec as per RFC 3261 [RFC3261]) of the SIP + REGISTER request. For other types of SIP requests, such as INVITE, + SUBSCRIBE, MESSAGE, etc., the SIP-AOR AVP value indicates the + intended destination of the request. This is typically populated in + the Request-URI of the SIP request. Extracting the SIP-AOR AVP value + from the proper SIP header field is the Diameter client's + responsibility. Extensions to SIP (new SIP methods or new semantics) + may require the SIP-AOR to be extracted from other parts of the + request. + + If the SIP request includes some sort of authentication information, + the Diameter client MUST include the user name, extracted from the + authentication information of the SIP request, in the User-Name AVP + value. + + The Message Format of the MAR command is as follows: + + ::= < Diameter Header: 286, REQ, PXY > + < Session-Id > + { Auth-Application-Id } + { Auth-Session-State } + { Origin-Host } + { Origin-Realm } + { Destination-Realm } + { SIP-AOR } + { SIP-Method } + [ Destination-Host ] + [ User-Name ] + [ SIP-Server-URI ] + [ SIP-Number-Auth-Items ] + [ SIP-Auth-Data-Item ] + * [ Proxy-Info ] + * [ Route-Record ] + * [ AVP ] + + */ + + struct dict_object * cmd; + struct dict_cmd_data data = + { + 303, /* Code */ + "Multimedia-Auth-Request", /* Name */ + CMD_FLAG_REQUEST | CMD_FLAG_PROXIABLE | CMD_FLAG_ERROR, /* Fixed flags */ + CMD_FLAG_REQUEST | CMD_FLAG_PROXIABLE /* Fixed flag values */ + }; + + struct local_rules_definition rules[] = + { { "Session-Id", RULE_FIXED_HEAD, -1, 1 } + ,{ "Auth-Application-Id", RULE_REQUIRED, -1, 1 } + ,{ "Auth-Session-State", RULE_REQUIRED, -1, 1 } + ,{ "Origin-Host", RULE_REQUIRED, -1, 1 } + ,{ "Origin-Realm", RULE_REQUIRED, -1, 1 } + ,{ "Destination-Realm", RULE_REQUIRED, -1, 1 } + ,{ "SIP-AOR", RULE_REQUIRED, -1, 1 } + ,{ "SIP-Method", RULE_REQUIRED, -1, 1 } + ,{ "Destination-Host", RULE_OPTIONAL, -1, 1 } + ,{ "User-Name", RULE_OPTIONAL, -1, 1 } + ,{ "SIP-Server-URI", RULE_OPTIONAL, -1, 1 } + ,{ "SIP-Number-Auth-Items", RULE_OPTIONAL, -1, 1 } + ,{ "SIP-Auth-Data-Item", RULE_OPTIONAL, -1, 1 } + ,{ "Proxy-Info", RULE_OPTIONAL, -1, -1 } + ,{ "Route-Record", RULE_OPTIONAL, -1, -1 } + + }; + + CHECK_dict_new( DICT_COMMAND, &data , cxdx_dict, &cmd); + PARSE_loc_rules( rules, cmd, AVP_BY_NAME ); + } + /* Multimedia-Auth-Answer (MAA) Command */ + { + /* + + The Multimedia-Auth-Answer (MAA) is indicated by the Command-Code set + to 286 and the Command Flags' 'R' bit cleared. The Diameter server + sends this command in response to a previously received Diameter + Multimedia-Auth-Request (MAR) command. + + In addition to the values already defined in RFC 3588 [RFC3588], the + Result-Code AVP may contain one of the values defined in + Section 10.1. + + If the Diameter server requires a User-Name AVP value to process the + Diameter MAR request, but the Diameter MAR message did not contain a + User-Name AVP value, the Diameter server MUST set the Result-Code AVP + value to DIAMETER_USER_NAME_REQUIRED (see Section 10.1.2) and return + it in a Diameter MAA message. The Diameter server MAY include a + SIP-Number-Auth-Items AVP and one or more SIP-Auth-Data-Item AVPs + with authentication information (e.g., a challenge). Upon reception + of this Diameter MAA message with the Result-Code AVP value set to + DIAMETER_USER_NAME_REQUIRED, the SIP server typically requests + authentication by generating a SIP 401 (Unauthorized) or SIP 407 + (Proxy Authentication Required) response back to the originator. + + If the User-Name AVP is present in the Diameter MAR message, the + Diameter server MUST verify the existence of the user in the realm, + i.e., the User-Name AVP value is a valid user within that realm. If + the Diameter server does not recognize the user name received in the + User-Name AVP, the Diameter server MUST build a Diameter + Multimedia-Auth-Answer (MAA) message and MUST set the Result-Code AVP + to DIAMETER_ERROR_USER_UNKNOWN. + + If the SIP-Methods AVP value of the Diameter MAR message is set to + REGISTER and a User-Name AVP is present, then the Diameter server + MUST authorize that User-Name AVP value is able to use the URI + included in the SIP-AOR AVP. If this authorization fails, the + Diameter server must set the Result-Code AVP to + DIAMETER_ERROR_IDENTITIES_DONT_MATCH and send it in a Diameter + Multimedia-Auth-Answer (MAA) message. + + Note: Correlation between User-Name and SIP-AOR AVP values is only + required for SIP REGISTER request, to prevent a user from + registering a SIP-AOR allocated to another user. In other types + of SIP requests (e.g., INVITE), the SIP-AOR indicates the intended + destination of the request, rather than the originator of it. + + The Diameter server MUST verify whether the authentication scheme + (SIP-Authentication-Scheme AVP value) indicated in the grouped + SIP-Auth-Data-Item AVP is supported or not. If that authentication + scheme is not supported, then the Diameter server MUST set the + Result-Code AVP to DIAMETER_ERROR_AUTH_SCHEME_NOT_SUPPORTED and send + it in a Diameter Multimedia-Auth-Answer (MAA) message. + + If the SIP-Number-Auth-Items AVP is present in the Diameter MAR + message, it indicates the number of authentication data items that + the Diameter client is requesting. It is RECOMMENDED that the + Diameter server, when building the Diameter MAA message, includes a + number of SIP-Auth-Data-Item AVPs that are a subset of the + authentication data items requested by the Diameter client in the + SIP-Number-Auth-Items AVP value of the Diameter MAR message. + + If the SIP-Server-URI AVP is present in the Diameter MAR message, + then the Diameter server MUST compare the stored SIP server (assigned + to the user) with the SIP-Server-URI AVP value (received in the + Diameter MAR message). If they don't match, the Diameter server MUST + temporarily save the newly received SIP server assigned to the user, + and MUST set an "authentication pending" flag for the user. If they + match, the Diameter server shall clear the "authentication pending" + flag for the user. + + In any other situation, if there is a success in processing the + Diameter MAR command and the Diameter server stored the + SIP-Server-URI, the Diameter server MUST set the Result-Code AVP + value to DIAMETER_SUCCESS and return it in a Diameter MAA message. + + If there is a success in processing the Diameter MAR command, but the + Diameter server does not store the SIP-Server-URI because the AVP was + not present in the Diameter MAR command, then the Diameter server + MUST set the Result-Code AVP value to either: + + 1. DIAMETER_SUCCESS_AUTH_SENT_SERVER_NOT_STORED, if the Diameter + server is sending authentication credentials to create a + challenge. + + 2. DIAMETER_SUCCESS_SERVER_NAME_NOT_STORED, if the Diameter server + successfully authenticated the user and authorized the SIP server + to proceed with the SIP request. + + Otherwise, the Diameter server MUST set the Result-Code AVP value to + DIAMETER_UNABLE_TO_COMPLY, and it MUST NOT include any + SIP-Auth-Data-Item AVP. + + The Message Format of the MAA command is as follows: + + ::= < Diameter Header: 286, PXY > + < Session-Id > + { Auth-Application-Id } + { Result-Code } + { Auth-Session-State } + { Origin-Host } + { Origin-Realm } + [ User-Name ] + [ SIP-AOR ] + [ SIP-Number-Auth-Items ] + * [ SIP-Auth-Data-Item ] + [ Authorization-Lifetime ] + [ Auth-Grace-Period ] + [ Redirect-Host ] + [ Redirect-Host-Usage ] + [ Redirect-Max-Cache-Time ] + * [ Proxy-Info ] + * [ Route-Record ] + * [ AVP ] + + */ + struct dict_object * cmd; + struct dict_cmd_data data = { + 286, /* Code */ + "Multimedia-Auth-Answer", /* Name */ + CMD_FLAG_REQUEST | CMD_FLAG_PROXIABLE | CMD_FLAG_ERROR, /* Fixed flags */ + CMD_FLAG_PROXIABLE /* Fixed flag values */ + }; + struct local_rules_definition rules[] = + { { "Session-Id", RULE_FIXED_HEAD, -1, 1 } + ,{ "Auth-Application-Id", RULE_REQUIRED, -1, 1 } + ,{ "Result-Code", RULE_REQUIRED, -1, 1 } + ,{ "Auth-Session-State", RULE_REQUIRED, -1, 1 } + ,{ "Origin-Host", RULE_REQUIRED, -1, 1 } + ,{ "Origin-Realm", RULE_REQUIRED, -1, 1 } + ,{ "User-Name", RULE_OPTIONAL, -1, 1 } + ,{ "SIP-AOR", RULE_OPTIONAL, -1, 1 } + ,{ "SIP-Number-Auth-Items", RULE_OPTIONAL, -1, 1 } + ,{ "SIP-Auth-Data-Item", RULE_OPTIONAL, -1, -1 } + ,{ "Authorization-Lifetime", RULE_OPTIONAL, -1, 1 } + ,{ "Auth-Grace-Period", RULE_OPTIONAL, -1, 1 } + ,{ "Redirect-Host", RULE_OPTIONAL, -1, 1 } + ,{ "Redirect-Host-Usage", RULE_OPTIONAL, -1, 1 } + ,{ "Redirect-Max-Cache-Time", RULE_OPTIONAL, -1, 1 } + ,{ "Proxy-Info", RULE_OPTIONAL, -1, -1 } + ,{ "Route-Record", RULE_OPTIONAL, -1, -1 } + + }; + + CHECK_dict_new( DICT_COMMAND, &data , cxdx_dict, &cmd); + PARSE_loc_rules( rules, cmd, AVP_BY_NAME ); + } + /* Server-Assignment-Request (SAR) Command */ + { + /* + + The Server-Assignment-Request (SAR) command is indicated by the + Command-Code set to 284 and the Command Flags' 'R' bit set. The + Diameter client in a SIP server sends this command to the Diameter + server to indicate the completion of the authentication process and + to request that the Diameter server store the URI of the SIP server + that is currently serving the user. The main functions of the + Diameter SAR command are to inform the Diameter server of the URI of + the SIP server allocated to the user, and to store or clear it from + the Diameter server. Additionally, the Diameter client can request + to download the user profile or part of it. + + During the registration procedure, a SIP server becomes assigned to + the user. The Diameter client in the assigned SIP server MUST + include its own URI in the SIP-Server-URI AVP of the + Server-Assignment-Request (SAR) Diameter message and send it to the + Diameter server. The Diameter server then becomes aware of the + allocation of the SIP server to the user name and the server's URI. + + The Diameter client in the SIP server MAY send a Diameter SAR message + because of other reasons. These reasons are identified in the + SIP-Server-Assignment-Type AVP (Section 9.4) value. For instance, a + Diameter client in a SIP server may contact the Diameter server to + request deregistration of a user, to inform the Diameter server of an + authentication failure, or just to download the user profile. For a + complete description of all the SIP-Server-Assignment-Type AVP + values, see Section 9.4. + + Typically the reception of a SIP REGISTER request in a SIP server + will trigger the Diameter client in the SIP server to send the + Diameter SAR message. However, if a SIP server is receiving other + SIP request, such as INVITE, and the SIP server does not have the + user profile, the Diameter client in the SIP server may send the + Diameter SAR message to the Diameter server in order to download the + user profile and make the Diameter server aware of the SIP server + assigned to the user. + The user profile is an important piece of information that dictates + the behavior of the SIP server when triggering or providing services + for the user. Typically the user profile is divided into: + + o Services to be rendered to the user when the user is registered + and initiates a SIP request. + + o Services to be rendered to the user when the user is registered + and a SIP request destined to that user arrives to the SIP proxy. + + o Services to be rendered to the user when the user is not + registered and a SIP request destined to that user arrives to the + SIP proxy. + + The SIP-Server-Assignment-Type AVP indicates the reason why the + Diameter client (SIP server) contacted the Diameter server. If the + Diameter client sets the SIP-Server-Assignment-Type AVP value to + REGISTRATION, RE_REGISTRATION, UNREGISTERED_USER, NO_ASSIGNMENT, + AUTHENTICATION_FAILURE or AUTHENTICATION_TIMEOUT, the Diameter client + MUST include exactly one SIP-AOR AVP in the Diameter SAR message. + + The SAR message MAY contain zero or more SIP-Supported-User-Data-Type + AVPs. Each of them contains a type of user data understood by the + SIP server. This allows the Diameter client to provide an indication + to the Diameter server of the different format of user data + understood by the SIP server. The Diameter server uses this + information to select one or more SIP-User-Data AVPs that will be + included in the SAA message. + + The Message Format of the SAR command is as follows: + + ::= < Diameter Header: 284, REQ, PXY > + < Session-Id > + { Auth-Application-Id } + { Auth-Session-State } + { Origin-Host } + { Origin-Realm } + { Destination-Realm } + { SIP-Server-Assignment-Type } + { SIP-User-Data-Already-Available } + [ Destination-Host ] + [ User-Name ] + [ SIP-Server-URI ] + * [ SIP-Supported-User-Data-Type ] + * [ SIP-AOR ] + * [ Proxy-Info ] + * [ Route-Record ] + * [ AVP ] + */ + struct dict_object * cmd; + struct dict_cmd_data data = { + 284, /* Code */ + "Server-Assignment-Request", /* Name */ + CMD_FLAG_REQUEST | CMD_FLAG_PROXIABLE | CMD_FLAG_ERROR, /* Fixed flags */ + CMD_FLAG_REQUEST | CMD_FLAG_PROXIABLE /* Fixed flag values */ + }; + struct local_rules_definition rules[] = + { { "Session-Id", RULE_FIXED_HEAD, -1, 1 } + ,{ "Auth-Application-Id", RULE_REQUIRED, -1, 1 } + ,{ "Auth-Session-State", RULE_REQUIRED, -1, 1 } + ,{ "Origin-Host", RULE_REQUIRED, -1, 1 } + ,{ "Origin-Realm", RULE_REQUIRED, -1, 1 } + ,{ "Destination-Realm", RULE_REQUIRED, -1, 1 } + ,{ "SIP-Server-Assignment-Type", RULE_REQUIRED, -1, 1 } + ,{ "SIP-User-Data-Already-Available", RULE_REQUIRED, -1, 1 } + ,{ "Destination-Host", RULE_OPTIONAL, -1, 1 } + ,{ "User-Name", RULE_OPTIONAL, -1, 1 } + ,{ "SIP-Server-URI", RULE_OPTIONAL, -1, 1 } + ,{ "SIP-Supported-User-Data-Type", RULE_OPTIONAL, -1, -1 } + ,{ "SIP-AOR", RULE_OPTIONAL, -1, -1 } + ,{ "Proxy-Info", RULE_OPTIONAL, -1, -1 } + ,{ "Route-Record", RULE_OPTIONAL, -1, -1 } + + }; + + CHECK_dict_new( DICT_COMMAND, &data , cxdx_dict, &cmd); + PARSE_loc_rules( rules, cmd, AVP_BY_NAME ); + } + /* Server-Assignment-Answer (SAA) Command */ + { + /* + + The Server-Assignment-Answer (SAA) is indicated by the Command-Code + set to 284 and the Command Flags' 'R' bit cleared. The Diameter + server sends this command in response to a previously received + Diameter Server-Assignment-Request (SAR) command. The response may + include the user profile or part of it, if requested. + + In addition to the values already defined in RFC 3588 [RFC3588], the + Result-Code AVP may contain one of the values defined in + Section 10.1. + + The Result-Code AVP value in the Diameter SAA message may indicate a + success or an error in the execution of the Diameter SAR command. If + Result-Code AVP value in the Diameter SAA message does not contain an + error code, the SAA message MAY include one or more SIP-User-Data + AVPs that typically contain the profile of the user, indicating + services that the SIP server can provide to that user. + + The Diameter server MAY include one or more + SIP-Supported-User-Data-Type AVPs, each one identifying a type of + user data format supported in the Diameter server. If there is not a + common supported user data type between the Diameter client and the + Diameter server, the Diameter server SHOULD declare its list of + supported user data types by including one or more + SIP-Supported-User-Data-Type AVPs in a Diameter SAA message. This + indication is merely for debugging reasons, since there is not a + fallback mechanism that allows the Diameter client to retrieve the + profile in a supported format. + + If the Diameter server requires a User-Name AVP value to process the + Diameter SAR request, but the Diameter SAR message did not contain a + User-Name AVP value, the Diameter server MUST set the Result-Code AVP + value to DIAMETER_USER_NAME_REQUIRED (see Section 10.1.2) and return + it in a Diameter SAA message. Upon reception of this Diameter SAA + message with the Result-Code AVP value set to + DIAMETER_USER_NAME_REQUIRED, the SIP server typically requests + authentication by generating a SIP 401 (Unauthorized) or SIP 407 + (Proxy Authentication Required) response back to the originator. + + If the User-Name AVP is included in the Diameter SAR message, upon + reception of the Diameter SAR message, the Diameter server MUST + verify the existence of the user in the realm, i.e., the User-Name + AVP value is a valid user within that realm. If the Diameter server + does not recognize the user name received in the User-Name AVP, the + Diameter server MUST build a Diameter Server-Assignment-Answer (SAA) + message and MUST set the Result-Code AVP to + DIAMETER_ERROR_USER_UNKNOWN. + Then the Diameter server MUST authorize that User-Name AVP value is a + valid authentication name for the SIP or SIPS URI included in the + SIP-AOR AVP of the Diameter SAR message. If this authorization + fails, the Diameter server must set the Result-Code AVP to + DIAMETER_ERROR_IDENTITIES_DONT_MATCH and send it in a Diameter + Server-Assignment-Answer (SAA) message. + + After successful execution of the Diameter SAR command, the Diameter + server MUST clear the "authentication pending" flag and SHOULD move + the temporarily stored SIP server URI to permanent storage. + + The actions of the Diameter server upon reception of the Diameter SAR + message depend on the value of the SIP-Server-Assignment-Type: + + o If the SIP-Server-Assignment-Type AVP value in the Diameter SAR + message is set to REGISTRATION or RE_REGISTRATION, the Diameter + server SHOULD verify that there is only one SIP-AOR AVP. + Otherwise, the Diameter server MUST answer with a Diameter SAA + message with the Result-Code AVP value set to + DIAMETER_AVP_OCCURS_TOO_MANY_TIMES and MUST NOT include any + SIP-User-Data AVP. If there is only one SIP-AOR AVP and if the + SIP-User-Data-Already-Available AVP value is set to + USER_DATA_NOT_AVAILABLE, then the Diameter server SHOULD include + one or more user profile data with the SIP or SIPS URI (SIP-AOR + AVP) and all other SIP identities associated with that AVP in the + SIP-User-Data AVP value of the Diameter SAA message. On selecting + the type of user data, the Diameter server SHOULD take into + account the supported formats at the SIP server + (SIP-Supported-User-Data-Type AVP in the SAR message) and the + local policy. Additionally, the Diameter server MUST set the + Result-Code AVP value to DIAMETER_SUCCESS in the Diameter SAA + message. The Diameter server considers the SIP AOR authenticated + and registered. + + o If the SIP-Server-Assignment-Type AVP value in the Diameter SAR + message is set to UNREGISTERED_USER, then the Diameter server MUST + store the SIP server address included in the SIP-Server-URI AVP + value. The Diameter server will return the SIP server address in + Diameter Location-Info-Answer (LIA) messages. If the + SIP-User-Data-Already-Available AVP value is set to + USER_DATA_NOT_AVAILABLE, then the Diameter server SHOULD include + one or more user profile data associated with the SIP or SIPS URI + (SIP-AOR AVP) and associated identities in the SIP-User-Data AVP + value of the Diameter SAA message. On selecting the type of user + data, the Diameter server SHOULD take into account the supported + formats at the SIP server (SIP-Supported-User-Data-Type AVP in the + SAR message) and the local policy. The Diameter server MUST set + the Result-Code AVP value to DIAMETER_SUCCESS. The Diameter + server considers the SIP AOR UNREGISTERED, but with a SIP server + allocated to trigger and provide services for unregistered users. + Note that in case of UNREGISTERED_USER (SIP-Server-Assignment-Type + AVP), the Diameter server MUST verify that there is only one + SIP-AOR AVP. Otherwise, the Diameter server MUST answer the + Diameter SAR message with a Diameter SAA message, and it MUST set + the Result-Code AVP value to DIAMETER_AVP_OCCURS_TOO_MANY_TIMES + and MUST NOT include any SIP-User-Data AVP. + If the User-Name AVP was not present in the Diameter SAR message + and the SIP-AOR is not known for the Diameter server, the Diameter + server MUST NOT include a User-Name AVP in the Diameter SAA + message and MUST set the Result-Code AVP value to + DIAMETER_ERROR_USER_UNKNOWN. + + o If the SIP-Server-Assignment-Type AVP value in the Diameter SAR + message is set to TIMEOUT_DEREGISTRATION, USER_DEREGISTRATION, + DEREGISTRATION_TOO_MUCH_DATA, or ADMINISTRATIVE_DEREGISTRATION, + the Diameter server MUST clear the SIP server address associated + with all SIP AORs indicated in each of the SIP-AOR AVP values + included in the Diameter SAR message. The Diameter server + considers all of these SIP AORs as not registered. The Diameter + server MUST set the Result-Code AVP value to DIAMETER_SUCCESS in + the Diameter SAA message. + + o If the SIP-Server-Assignment-Type AVP value in the Diameter SAR + message is set to TIMEOUT_DEREGISTRATION_STORE_SERVER_NAME or + USER_DEREGISTRATION_STORE_SERVER_NAME, the Diameter server MAY + keep the SIP server address associated with the SIP AORs included + in the SIP-AOR AVP values of the Diameter SAR message, even though + the SIP AORs become unregistered. This feature allows a SIP + server to request that the Diameter server remain an assigned SIP + server for those SIP AORs (SIP-AOR AVP values) allocated to the + same user name, and avoid SIP server assignment. The Diameter + server MUST consider all these SIP AORs as not registered. If the + Diameter server honors the request of the Diameter client (SIP + server) to remain as an allocated SIP server, then the Diameter + server MUST keep the SIP server assigned to those SIP AORs + allocated to the username and MUST set the Result-Code AVP value + to DIAMETER_SUCCESS in the Diameter SAA message. Otherwise, when + the Diameter server does not honor the request of the Diameter + client (SIP server) to remain as an allocated SIP server, the + Diameter server MUST clear the SIP server name assigned to those + SIP AORs and it MUST set the Result-Code AVP value to + DIAMETER_SUCCESS_SERVER_NAME_NOT_STORED in the Diameter SAA + message. + o If the SIP-Server-Assignment-Type AVP value in the Diameter SAR + message is set to NO_ASSIGNMENT, the Diameter server SHOULD first + verify that the SIP-Server-URI AVP value in the Diameter SAR + message is the same URI as the one assigned to the SIP-AOR AVP + value. If they differ, then the Diameter server MUST set the + Result-Code AVP value to DIAMETER_UNABLE_TO_COMPLY in the Diameter + SAA message. Otherwise, if the SIP-User-Data-Already-Available + AVP value is set to USER_DATA_NOT_AVAILABLE, then the Diameter + server SHOULD include the user profile data with the SIP or SIPS + URI (SIP-AOR AVP) and all other SIP identities associated with + that AVP in the SIP-User-Data AVP value of the Diameter SAA + message. On selecting the type of user data, the Diameter server + SHOULD take into account the supported formats at the SIP server + (SIP-Supported-User-Data-Type AVP in the SAR message) and the + local policy. + + o If the SIP-Server-Assignment-Type AVP value in the Diameter SAR + message is set to AUTHENTICATION_FAILURE or + AUTHENTICATION_TIMEOUT, the Diameter server MUST verify that there + is exactly one SIP-AOR AVP in the Diameter SAR message. If the + number of occurrences of the SIP-AOR AVP is not exactly one, the + Diameter server MUST set the Result-Code AVP value to + DIAMETER_AVP_OCCURS_TOO_MANY_TIMES in the Diameter SAA message, + and SHOULD not take further actions. If there is exactly one + SIP-AOR AVP in the Diameter SAR message, the Diameter server MUST + clear the address of the SIP server assigned to the SIP AOR + allocated to the user name, and the Diameter server MUST set the + Result-Code AVP value to DIAMETER_SUCCESS in the Diameter SAA + message. The Diameter server MUST consider the SIP AOR as not + registered. + + The Message Format of the SAA command is as follows: + + ::= < Diameter Header: 284, PXY > + < Session-Id > + { Auth-Application-Id } + { Result-Code } + { Auth-Session-State } + { Origin-Host } + { Origin-Realm } + * [ SIP-User-Data ] + [ SIP-Accounting-Information ] + * [ SIP-Supported-User-Data-Type ] + [ User-Name ] + [ Auth-Grace-Period ] + [ Authorization-Lifetime ] + [ Redirect-Host ] + [ Redirect-Host-Usage ] + [ Redirect-Max-Cache-Time ] + * [ Proxy-Info ] + * [ Route-Record ] + * [ AVP ] + + + + + */ + struct dict_object * cmd; + struct dict_cmd_data data = { + 284, /* Code */ + "Server-Assignment-Answer", /* Name */ + CMD_FLAG_REQUEST | CMD_FLAG_PROXIABLE | CMD_FLAG_ERROR, /* Fixed flags */ + CMD_FLAG_PROXIABLE /* Fixed flag values */ + }; + struct local_rules_definition rules[] = + { { "Session-Id", RULE_FIXED_HEAD, -1, 1 } + ,{ "Auth-Application-Id", RULE_REQUIRED, -1, 1 } + ,{ "Result-Code", RULE_REQUIRED, -1, 1 } + ,{ "Auth-Session-State", RULE_REQUIRED, -1, 1 } + ,{ "Origin-Host", RULE_REQUIRED, -1, 1 } + ,{ "Origin-Realm", RULE_REQUIRED, -1, 1 } + ,{ "SIP-User-Data", RULE_OPTIONAL, -1, -1 } + ,{ "SIP-Accounting-Information", RULE_OPTIONAL, -1, 1 } + ,{ "SIP-Supported-User-Data-Type", RULE_OPTIONAL, -1, -1 } + ,{ "User-Name", RULE_OPTIONAL, -1, 1 } + ,{ "Auth-Grace-Period", RULE_OPTIONAL, -1, 1 } + ,{ "Authorization-Lifetime", RULE_OPTIONAL, -1, 1 } + ,{ "Redirect-Host", RULE_OPTIONAL, -1, 1 } + ,{ "Redirect-Host-Usage", RULE_OPTIONAL, -1, 1 } + ,{ "Redirect-Max-Cache-Time", RULE_OPTIONAL, -1, 1 } + ,{ "Proxy-Info", RULE_OPTIONAL, -1, -1 } + ,{ "Route-Record", RULE_OPTIONAL, -1, -1 } + + }; + + CHECK_dict_new( DICT_COMMAND, &data , cxdx_dict, &cmd); + PARSE_loc_rules( rules, cmd, AVP_BY_NAME ); + } + /* Location-Info-Request (LIR) Command */ + { + /* + + The Location-Info-Request (LIR) is indicated by the Command-Code set + to 285 and the Command Flags' 'R' bit set. The Diameter client in a + SIP server sends this command to the Diameter server to request + routing information, e.g., the URI of the SIP server assigned to the + SIP-AOR AVP value allocated to the users. + + The Message Format of the LIR command is as follows: + + ::= < Diameter Header: 285, REQ, PXY > + < Session-Id > + { Auth-Application-Id } + { Auth-Session-State } + { Origin-Host } + { Origin-Realm } + { Destination-Realm } + { SIP-AOR } + [ Destination-Host ] + * [ Proxy-Info ] + * [ Route-Record ] + * [ AVP ] + */ + struct dict_object * cmd; + struct dict_cmd_data data = { + 285, /* Code */ + "Location-Info-Request", /* Name */ + CMD_FLAG_REQUEST | CMD_FLAG_PROXIABLE | CMD_FLAG_ERROR, /* Fixed flags */ + CMD_FLAG_REQUEST | CMD_FLAG_PROXIABLE /* Fixed flag values */ + }; + struct local_rules_definition rules[] = + { { "Session-Id", RULE_FIXED_HEAD, -1, 1 } + ,{ "Auth-Application-Id", RULE_REQUIRED, -1, 1 } + ,{ "Auth-Session-State", RULE_REQUIRED, -1, 1 } + ,{ "Origin-Host", RULE_REQUIRED, -1, 1 } + ,{ "Origin-Realm", RULE_REQUIRED, -1, 1 } + ,{ "Destination-Realm", RULE_REQUIRED, -1, 1 } + ,{ "SIP-AOR", RULE_REQUIRED, -1, 1 } + ,{ "Destination-Host", RULE_OPTIONAL, -1, 1 } + ,{ "Proxy-Info", RULE_OPTIONAL, -1, -1 } + ,{ "Route-Record", RULE_OPTIONAL, -1, -1 } + + }; + + CHECK_dict_new( DICT_COMMAND, &data , cxdx_dict, &cmd); + PARSE_loc_rules( rules, cmd, AVP_BY_NAME ); + } + /* Location-Info-Answer (LIA) Command */ + { + /* + The Location-Info-Answer (LIA) is indicated by the Command-Code set + to 285 and the Command Flags' 'R' bit cleared. The Diameter server + sends this command in response to a previously received Diameter + Location-Info-Request (LIR) command. + + In addition to the values already defined in RFC 3588 [RFC3588], the + Result-Code AVP may contain one of the values defined in + Section 10.1. When the Diameter server finds an error in processing + the Diameter LIR message, the Diameter server MUST stop the process + of the message and answer with a Diameter LIA message that includes + the appropriate error code in the Result-Code AVP value. When there + is no error, the Diameter server MUST set the Result-Code AVP value + to DIAMETER_SUCCESS in the Diameter LIA message. + + One of the errors that the Diameter server may find is that the + SIP-AOR AVP value is not a valid user in the realm. In such cases, + the Diameter server MUST set the Result-Code AVP value to + DIAMETER_ERROR_USER_UNKNOWN and return it in a Diameter LIA message. + + If the Diameter server cannot process the Diameter LIR command, e.g., + due to a database error, the Diameter server MUST set the Result-Code + AVP value to DIAMETER_UNABLE_TO_COMPLY and return it in a Diameter + LIA message. The Diameter server MUST NOT include any SIP-Server-URI + or SIP-Server-Capabilities AVP in the Diameter LIA message. + + The Diameter server may or may not be aware of a SIP server assigned + to the SIP-AOR AVP value included in the Diameter LIR message. If + the Diameter server is aware of a SIP server allocated to that + particular user, the Diameter server MUST include the URI of such SIP + server in the SIP-Server-URI AVP and return it in a Diameter LIA + message. This is typically the situation when the user is either + registered, or unregistered but a SIP server is still assigned to the + user. + + When the Diameter server is not aware of a SIP server allocated to + the user (typically the case when the user unregistered), the + Result-Code AVP value in the Diameter LIA message depends on whether + the Diameter server is aware that the user has services defined for + unregistered users: + + o Those users who have services defined for unregistered users may + require the allocation of a SIP server to trigger and perhaps + execute those services. Therefore, when the Diameter server is + not aware of an assigned SIP server, but the user has services + defined for unregistered users, the Diameter server MUST set the + Result-Code AVP value to DIAMETER_UNREGISTERED_SERVICE and return + it in a Diameter LIA message. The Diameter server MAY also + include a SIP-Server-Capabilities AVP to facilitate the SIP server + (Diameter client) with the selection of an appropriate SIP server + with the required capabilities. Absence of the SIP-Server- + Capabilities AVP indicates to the SIP server (Diameter client) + that any SIP server is suitable to be allocated for the user. + + o Those users who do not have service defined for unregistered users + do not require further processing. The Diameter server MUST set + the Result-Code AVP value to + DIAMETER_ERROR_IDENTITY_NOT_REGISTERED and return it to the + Diameter client in a Diameter LIA message. The SIP server + (Diameter client) may return the appropriate SIP response (e.g., + 480 (Temporarily unavailable)) to the original SIP request. + + The Message Format of the LIA command is as follows: + + ::= < Diameter Header: 285, PXY > + < Session-Id > + { Auth-Application-Id } + { Result-Code } + { Auth-Session-State } + { Origin-Host } + { Origin-Realm } + [ SIP-Server-URI ] + [ SIP-Server-Capabilities ] + [ Auth-Grace-Period ] + [ Authorization-Lifetime ] + [ Redirect-Host ] + [ Redirect-Host-Usage ] + [ Redirect-Max-Cache-Time ] + * [ Proxy-Info ] + * [ Route-Record ] + * [ AVP ] + */ + struct dict_object * cmd; + struct dict_cmd_data data = { + 285, /* Code */ + "Location-Info-Answer", /* Name */ + CMD_FLAG_REQUEST | CMD_FLAG_PROXIABLE | CMD_FLAG_ERROR, /* Fixed flags */ + CMD_FLAG_PROXIABLE /* Fixed flag values */ + }; + struct local_rules_definition rules[] = + { { "Session-Id", RULE_FIXED_HEAD, -1, 1 } + ,{ "Auth-Application-Id", RULE_REQUIRED, -1, 1 } + ,{ "Result-Code", RULE_REQUIRED, -1, 1 } + ,{ "Auth-Session-State", RULE_REQUIRED, -1, 1 } + ,{ "Origin-Host", RULE_REQUIRED, -1, 1 } + ,{ "Origin-Realm", RULE_REQUIRED, -1, 1 } + ,{ "SIP-Server-URI", RULE_OPTIONAL, -1, 1 } + ,{ "SIP-Server-Capabilities", RULE_OPTIONAL, -1, 1 } + ,{ "Auth-Grace-Period", RULE_OPTIONAL, -1, 1 } + ,{ "Authorization-Lifetime", RULE_OPTIONAL, -1, 1 } + ,{ "Redirect-Host", RULE_OPTIONAL, -1, 1 } + ,{ "Redirect-Host-Usage", RULE_OPTIONAL, -1, 1 } + ,{ "Redirect-Max-Cache-Time", RULE_OPTIONAL, -1, 1 } + ,{ "Proxy-Info", RULE_OPTIONAL, -1, -1 } + ,{ "Route-Record", RULE_OPTIONAL, -1, -1 } + + }; + + CHECK_dict_new( DICT_COMMAND, &data , cxdx_dict, &cmd); + PARSE_loc_rules( rules, cmd, AVP_BY_NAME ); + } + /* Registration-Termination-Request (RTR) Command */ + { + /* + The Registration-Termination-Request (RTR) command is indicated by + the Command-Code set to 287 and the Command Flags' 'R' bit set. The + Diameter server sends this command to the Diameter client in a SIP + server to indicate to the SIP server that one or more SIP AORs have + to be deregistered. The command allows an operator to + administratively cancel the registration of a user from a centralized + Diameter server. + + The Diameter server has the capability to initiate the deregistration + of a user and inform the SIP server by means of the Diameter RTR + command. The Diameter server can decide whether only one SIP AOR is + going to be deregistered, a list of SIP AORs, or all the SIP AORs + allocated to the user. + + The absence of a SIP-AOR AVP in the Diameter RTR message indicates + that all the SIP AORs allocated to the user identified by the + User-Name AVP are being deregistered. + + The Diameter server MUST include a SIP-Deregistration-Reason AVP + value to indicate the reason for the deregistration. + + The Message Format of the RTR command is as follows: + + ::= < Diameter Header: 287, REQ, PXY > + < Session-Id > + { Auth-Application-Id } + { Auth-Session-State } + { Origin-Host } + { Origin-Realm } + { Destination-Host } + { SIP-Deregistration-Reason } + [ Destination-Realm ] + [ User-Name ] + * [ SIP-AOR ] + * [ Proxy-Info ] + * [ Route-Record ] + * [ AVP ] + + */ + + struct dict_object * cmd; + struct dict_cmd_data data = + { + 287, /* Code */ + "Registration-Termination-Request", /* Name */ + CMD_FLAG_REQUEST | CMD_FLAG_PROXIABLE | CMD_FLAG_ERROR, /* Fixed flags */ + CMD_FLAG_REQUEST | CMD_FLAG_PROXIABLE /* Fixed flag values */ + }; + + struct local_rules_definition rules[] = + { + { "Session-Id", RULE_FIXED_HEAD, -1, 1 }, + { "Auth-Application-Id", RULE_REQUIRED, -1, 1 }, + { "Auth-Session-State", RULE_REQUIRED, -1, 1 }, + { "Origin-Host", RULE_REQUIRED, -1, 1 }, + { "Origin-Realm", RULE_REQUIRED, -1, 1 }, + { "Destination-Host", RULE_REQUIRED, -1, 1 }, + { "SIP-Deregistration-Reason",RULE_REQUIRED, -1, 1 }, + { "Destination-Realm", RULE_OPTIONAL, -1, 1 }, + { "User-Name", RULE_OPTIONAL, -1, 1 }, + { "SIP-AOR", RULE_REQUIRED, -1, -1 }, + { "Proxy-Info", RULE_OPTIONAL, -1, -1 }, + { "Route-Record", RULE_OPTIONAL, -1, -1 } + }; + + CHECK_dict_new( DICT_COMMAND, &data , cxdx_dict, &cmd); + PARSE_loc_rules( rules, cmd, AVP_BY_NAME ); + } + /* Registration-Termination-Answer (RTA) Command */ + { + /* + The Registration-Termination-Answer (RTA) is indicated by the + Command-Code set to 287 and the Command Flags' 'R' bit cleared. The + Diameter client sends this command in response to a previously + received Diameter Registration-Termination-Request (RTR) command. + + In addition to the values already defined in RFC 3588 [RFC3588], the + Result-Code AVP may contain one of the values defined in + Section 10.1. + + If the SIP server (Diameter client) requires a User-Name AVP value to + process the Diameter RTR request, but the Diameter RTR message did + not contain a User-Name AVP value, the Diameter client MUST set the + Result-Code AVP value to DIAMETER_USER_NAME_REQUIRED (see Section + 10.1.2) and return it in a Diameter RTA message. + + The SIP server (Diameter client) applies the administrative + deregistration to each of the URIs included in each of the SIP-AOR + AVP values, or, if there is no SIP-AOR AVP present in the Diameter + RTR request, to all the URIs allocated to the User-Name AVP value. + + The value of the SIP-Deregistration-Reason AVP in the Diameter RTR + command has an effect on the actions performed at the SIP server + (Diameter client): + + o If the value is set to PERMANENT_TERMINATION, then the user has + terminated his/her registration to the realm. If informing the + interested parties (e.g., subscribers to the "reg" event + [RFC3680]) about the administrative deregistration is supported + through SIP procedures, the SIP server (Diameter client) will do + so. The Diameter Client in the SIP Server SHOULD NOT request a + new user registration. The SIP server clears the registration + state of the deregistered AORs. + + o If the value is set to NEW_SIP_SERVER_ASSIGNED, the Diameter + server informs the SIP server (Diameter client) that a new SIP + server has been allocated to the user, due to some reason. The + SIP server, if supported through SIP procedures, will inform the + interested parties (e.g., subscribers to the "reg" event + [RFC3680]) about the administrative deregistration at this SIP + server. The Diameter client in the SIP server SHOULD NOT request + a new user registration. The SIP server clears the registration + state of the deregistered SIP AORs. + + o If the value is set to SIP_SERVER_CHANGE, the Diameter server + informs the SIP server (Diameter client) that a new SIP server has + to be allocated to the user, e.g., due to user's capabilities + requiring a new SIP server, or not enough resources in the current + SIP server. If informing the interested parties about the + administrative deregistration is supported through SIP procedures + (e.g., subscriptions to the "reg" event [RFC3680]), the SIP server + will do so. The Diameter client in the SIP Server SHOULD NOT + request a new user registration. The SIP server clears the + registration state of the deregistered SIP AORs. + + o If the value is set to REMOVE_SIP_SERVER, the Diameter server + informs the SIP server (Diameter client) that the SIP server will + no longer be bound in the Diameter server with that user. The SIP + server can delete all data related to the user. + + The Message Format of the RTA command is as follows: + + ::= < Diameter Header: 287, PXY > + < Session-Id > + { Auth-Application-Id } + { Result-Code } + { Auth-Session-State } + { Origin-Host } + { Origin-Realm } + [ Authorization-Lifetime ] + [ Auth-Grace-Period ] + [ Redirect-Host ] + [ Redirect-Host-Usage ] + [ Redirect-Max-Cache-Time ] + * [ Proxy-Info ] + * [ Route-Record ] + * [ AVP ] + + */ + struct dict_object * cmd; + struct dict_cmd_data data = { + 287, /* Code */ + "Registration-Termination-Answer", /* Name */ + CMD_FLAG_REQUEST | CMD_FLAG_PROXIABLE | CMD_FLAG_ERROR, /* Fixed flags */ + CMD_FLAG_PROXIABLE /* Fixed flag values */ + }; + struct local_rules_definition rules[] = + { { "Session-Id", RULE_FIXED_HEAD, -1, 1 } + ,{ "Auth-Application-Id", RULE_REQUIRED, -1, 1 } + ,{ "Result-Code", RULE_REQUIRED, -1, 1 } + ,{ "Auth-Session-State", RULE_REQUIRED, -1, 1 } + ,{ "Origin-Host", RULE_REQUIRED, -1, 1 } + ,{ "Origin-Realm", RULE_REQUIRED, -1, 1 } + ,{ "Authorization-Lifetime", RULE_OPTIONAL, -1, 1 } + ,{ "Auth-Grace-Period", RULE_OPTIONAL, -1, 1 } + ,{ "Redirect-Host", RULE_OPTIONAL, -1, 1 } + ,{ "Redirect-Host-Usage", RULE_OPTIONAL, -1, 1 } + ,{ "Redirect-Max-Cache-Time", RULE_OPTIONAL, -1, 1 } + ,{ "Proxy-Info", RULE_OPTIONAL, -1, -1 } + ,{ "Route-Record", RULE_OPTIONAL, -1, -1 } + + }; + + CHECK_dict_new( DICT_COMMAND, &data , cxdx_dict, &cmd); + PARSE_loc_rules( rules, cmd, AVP_BY_NAME ); + } + + /* Push-Profile-Request (PPR) Command */ + { + /* + The Push-Profile-Request (PPR) command is indicated by the + Command-Code set to 288 and the Command Flags' 'R' bit set. The + Diameter server sends this command to the Diameter client in a SIP + server to update either the user profile of an already registered + user in that SIP server or the SIP accounting information. This + allows an operator to modify the data of a user profile or the + accounting information and push it to the SIP server where the user + is registered. + + Each user has a user profile associated with him/her and other + accounting information. The profile or the accounting information + may change with time, e.g., due to addition of new services to the + user. When the user profile or the accounting information changes, + the Diameter server sends a Diameter Push-Profile-Request (PPR) + command to the Diameter client in a SIP server, in order to start + applying those new services. + + A PPR command MAY contain a SIP-Accounting-Information AVP that + updates the addresses of the accounting servers. Changes in the + addresses of the accounting servers take effect immediately. The + Diameter client SHOULD close any existing accounting session with the + existing server and start providing accounting information to the + newly acquired accounting server. + + A PPR command MAY contain zero or more SIP-User-Data AVP values + containing the new user profile. On selecting the type of user data, + the Diameter server SHOULD take into account the supported formats at + the SIP server (SIP-Supported-User-Data-Type AVP sent in a previous + SAR message) and the local policy. + + The User-Name AVP indicates the user to whom the profile is + applicable. + + The Message Format of the PPR command is as follows: + + ::= < Diameter Header: 288, REQ, PXY > + < Session-Id > + { Auth-Application-Id } + { Auth-Session-State } + { Origin-Host } + { Origin-Realm } + { Destination-Realm } + { User-Name } + * [ SIP-User-Data ] + [ SIP-Accounting-Information ] + [ Destination-Host ] + [ Authorization-Lifetime ] + [ Auth-Grace-Period ] + * [ Proxy-Info ] + * [ Route-Record ] + * [ AVP ] + + */ + struct dict_object * cmd; + struct dict_cmd_data data = { + 288, /* Code */ + "Push-Profile-Request", /* Name */ + CMD_FLAG_REQUEST | CMD_FLAG_PROXIABLE | CMD_FLAG_ERROR, /* Fixed flags */ + CMD_FLAG_REQUEST | CMD_FLAG_PROXIABLE /* Fixed flag values */ + }; + struct local_rules_definition rules[] = + { { "Session-Id", RULE_FIXED_HEAD, -1, 1 } + ,{ "Auth-Application-Id", RULE_REQUIRED, -1, 1 } + ,{ "Auth-Session-State", RULE_REQUIRED, -1, 1 } + ,{ "Origin-Host", RULE_REQUIRED, -1, 1 } + ,{ "Origin-Realm", RULE_REQUIRED, -1, 1 } + ,{ "Destination-Realm", RULE_REQUIRED, -1, 1 } + ,{ "User-Name", RULE_REQUIRED, -1, 1 } + ,{ "SIP-User-Data", RULE_OPTIONAL, -1, -1 } + ,{ "SIP-Accounting-Information", RULE_OPTIONAL, -1, 1 } + ,{ "Destination-Host", RULE_OPTIONAL, -1, 1 } + ,{ "Authorization-Lifetime", RULE_OPTIONAL, -1, 1 } + ,{ "Auth-Grace-Period", RULE_OPTIONAL, -1, 1 } + ,{ "Proxy-Info", RULE_OPTIONAL, -1, -1 } + ,{ "Route-Record", RULE_OPTIONAL, -1, -1 } + + }; + + CHECK_dict_new( DICT_COMMAND, &data , cxdx_dict, &cmd); + PARSE_loc_rules( rules, cmd, AVP_BY_NAME ); + } + /* Push-Profile-Answer (PPA) Command */ + { + /* + + + The Push-Profile-Answer (PPA) is indicated by the Command-Code set to + 288 and the Command Flags' 'R' bit cleared. The Diameter client + sends this command in response to a previously received Diameter + Push-Profile-Request (PPR) command. + + In addition to the values already defined in RFC 3588 [RFC3588], the + Result-Code AVP may contain one of the values defined in + Section 10.1. + + If there is no error when processing the received Diameter PPR + message, the SIP server (Diameter client) MUST download the received + user profile from the SIP-User-Data AVP values in the Diameter PPR + message and store it associated with the user specified in the + User-Name AVP value. + + If the SIP server does not recognize or does not support some of the + data transferred in the SIP-User-Data AVP values, the Diameter client + in the SIP server MUST return a Diameter PPA message that includes a + Result-Code AVP set to the value DIAMETER_ERROR_NOT_SUPPORTED_USER_DATA. + + If the SIP server (Diameter client) receives a Diameter PPR message + with a User-Name AVP that is unknown, the Diameter client MUST set + the Result-Code AVP value to DIAMETER_ERROR_USER_UNKNOWN and MUST + return it to the Diameter server in a Diameter PPA message. + + If the SIP server (Diameter client) receives in the + SIP-User-Data-Content AVP value (of the grouped SIP-User-Data AVP) + more data than it can accept, it MUST set the Result-Code AVP value + to DIAMETER_ERROR_TOO_MUCH_DATA and MUST return it to the Diameter + server in a Diameter PPA message. The SIP server MUST NOT override + the existing user profile with the one received in the PPR message. + + If the Diameter server receives the Result-Code AVP value set to + DIAMETER_ERROR_TOO_MUCH_DATA in a Diameter PPA message, it SHOULD + force a new re-registration of the user by sending to the Diameter + client a Diameter Registration-Termination-Request (RTR) with the + SIP-Deregistration-Reason AVP value set to SIP_SERVER_CHANGE. This + will force a re-registration of the user and will trigger a selection + of a new SIP server. + + If the Diameter client is not able to honor the command, for any + other reason, it MUST set the Result-Code AVP value to + DIAMETER_UNABLE_TO_COMPLY and it MUST return it in a Diameter PPA + message. + + The Message Format of the PPA command is as follows: + + ::= < Diameter Header: 288, PXY > + < Session-Id > + { Auth-Application-Id } + { Result-Code } + { Auth-Session-State } + { Origin-Host } + { Origin-Realm } + [ Redirect-Host ] + [ Redirect-Host-Usage ] + [ Redirect-Max-Cache-Time ] + * [ Proxy-Info ] + * [ Route-Record ] + * [ AVP ] + + + + */ + struct dict_object * cmd; + struct dict_cmd_data data = { + 288, /* Code */ + "Push-Profile-Answer", /* Name */ + CMD_FLAG_REQUEST | CMD_FLAG_PROXIABLE | CMD_FLAG_ERROR, /* Fixed flags */ + CMD_FLAG_PROXIABLE /* Fixed flag values */ + }; + struct local_rules_definition rules[] = + { { "Session-Id", RULE_FIXED_HEAD, -1, 1 } + ,{ "Auth-Application-Id", RULE_REQUIRED, -1, 1 } + ,{ "Result-Code", RULE_REQUIRED, -1, 1 } + ,{ "Auth-Session-State", RULE_REQUIRED, -1, 1 } + ,{ "Origin-Host", RULE_REQUIRED, -1, 1 } + ,{ "Origin-Realm", RULE_REQUIRED, -1, 1 } + ,{ "Redirect-Host", RULE_OPTIONAL, -1, 1 } + ,{ "Redirect-Host-Usage", RULE_OPTIONAL, -1, 1 } + ,{ "Redirect-Max-Cache-Time", RULE_OPTIONAL, -1, 1 } + ,{ "Proxy-Info", RULE_OPTIONAL, -1, -1 } + ,{ "Route-Record", RULE_OPTIONAL, -1, -1 } + + }; + + CHECK_dict_new( DICT_COMMAND, &data , cxdx_dict, &cmd); + PARSE_loc_rules( rules, cmd, AVP_BY_NAME ); + } + +#endif /* TODO - NRGJ */ + + } /* end Command section */ + + + + TRACE_DEBUG(INFO, "Extension 'Dictionary CxDx' initialized"); + return 0; +} + + +EXTENSION_ENTRY("dict_cxdx", cxdx_dict_init); + diff -r 513edd0d31b9 -r 26b5748a6b70 contrib/CxDx/dict_cxdx.xml --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/contrib/CxDx/dict_cxdx.xml Fri Oct 14 08:15:34 2011 +0200 @@ -0,0 +1,407 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +