Mercurial > hg > freeDiameter
view doc/echodrop.rgwx.conf.sample @ 1513:73e563165594
Add 3GPP TS 29.468 V15.8.0 (2019-12)
Add AVPs:
- BMSC-Address, Address, code 3500, section 6.4.2
- BMSC-Port, Unsigned32, code 3501, section 6.4.3
- Common-Tunnel-Endpoint-Identifier, OctetString, code 3524, section 6.4.26
- FEC-Request, OctetString, code 3525, section 6.4.27
- FEC-Result, Unsigned32, code 3531, section 6.4.33
- Local-M1-Information, Grouped, code 3518, section 6.4.20
- Local-MB2-U-Information, Grouped, code 3519, section 6.4.21
- MB2U-Security, Unsigned32, code 3517, section 6.4.19
- MBMS-Bearer-Event, Unsigned32, code 3502, section 6.4.4
- MBMS-Bearer-Event-Notification, Grouped, code 3503, section 6.4.5
- MBMS-Bearer-Request, Grouped, code 3504, section 6.4.6
- MBMS-Bearer-Response, Grouped, code 3505, section 6.4.7
- MBMS-Bearer-Result, Unsigned32, code 3506, section 6.4.8
- MBMS-eNB-IP-Multicast-Address, Address, code 3520, section 6.4.22
- MBMS-eNB-IPv6-Multicast-Address, Address, code 3521, section 6.4.23
- MBMS-GW-SSM-IP-Address-29.468, Address, code 3522, section 6.4.24
- MBMS-GW-SSM-IPv6-Address-29.468, Address, code 3523, section 6.4.25
- MBMS-Start-Time, Time, code 3507, section 6.4.9
- Radio-Frequency-29.468, Unsigned32, code 3508, section 6.4.10
- ROHC-Full-Header-Periodicity, Float32, code 3527, section 6.4.29
- ROHC-Max-CID, Unsigned32, code 3532, section 6.4.34
- ROHC-Profile, Unsigned32, code 3528, section 6.4.30
- ROHC-Request, Grouped, code 3526, section 6.4.28
- ROHC-Result, Unsigned32, code 3530, section 6.4.32
- TMGI-Allocation-Request, Grouped, code 3509, section 6.4.11
- TMGI-Allocation-Response, Grouped, code 3510, section 6.4.12
- TMGI-Allocation-Result, Unsigned32, code 3511, section 6.4.13
- TMGI-Deallocation-Request, Grouped, code 3512, section 6.4.14
- TMGI-Deallocation-Response, Grouped, code 3513, section 6.4.15
- TMGI-Deallocation-Result, Unsigned32, code 3514, section 6.4.16
- TMGI-Expiry, Grouped, code 3515, section 6.4.17
- TMGI-Number, Unsigned32, code 3516, section 6.4.18
- Userplane-Protocol-Result, Grouped, code 3529, section 6.4.31
Note: Name conflict with 3GPP TS 29.061 MBMS-GW-SSM-IP-Address (924).
3GPP TS 29.061 V10.4.0 (2011-09) CR 0355 added MBMS-GW-SSM-IP-Address (924).
3GPP TS 29.468 V14.0.0 (2016-12) CR 0021 added MBMS-GW-SSM-IP-Address (3522).
Fix: MBMS-GW-SSM-IP-Address (3522) renamed to MBMS-GW-SSM-IP-Address-29.468 (3522).
Note: Name conflict with 3GPP TS 29.061 MBMS-GW-SSM-IPv6-Address (925).
3GPP TS 29.061 V10.4.0 (2011-09) CR 0355 added MBMS-GW-SSM-IPv6-Address (925).
3GPP TS 29.468 V14.0.0 (2016-12) CR 0021 added MBMS-GW-SSM-IPv6-Address (3523).
Fix: MBMS-GW-SSM-IPv6-Address (3523) renamed to MBMS-GW-SSM-IPv6-Address-29.468 (3523).
Note: Name conflict with 3GPP TS 32.299 Radio-Frequency (3462).
3GPP TS 29.468 V12.0.0 (2014-09) added Radio-Frequency (3508).
3GPP TS 32.299 V13.1.0 (2015-06) CR 0638 added Radio-Frequency (3462).
Fix: Radio-Frequency (3508) renamed to Radio-Frequency-29.468 (3508).
author | Luke Mewburn <luke@mewburn.net> |
---|---|
date | Tue, 07 Apr 2020 19:38:33 +1000 |
parents | 4c935aecee6c |
children |
line wrap: on
line source
# Sample configuration file for the echodrop.rgwx plugin of RADIUS/Diameter translation agent. # # This plugin allows to easily specify the following handling of RADIUS attributes # received in a RADIUS request: # - ECHO: the attribute will be copied verbatim in the RADIUS answer. # - DROP: the attribute is discarded. # # In both cases, the attribute is NOT translated in Diameter message. # # The format of this file is: # <action> CODE <code> [ VENDOR <vid> [ TLV <type> | EXT <ext-type> ] ]; # Where: # <action>: is either DROP or ECHO. # <code> : is a (decimal) integer between 0 and 255, and designates the type of the attribute. # # The remaining of the line is optional, and should only be used # with lines containing "CODE 26" (Vendor-Specific Attribute) # <vid> : a Vendor value (32 bit), see RFC2865 section 5.26 for detail. # # <type> : The attribute is interpreted as TLV (rfc3865, section 5.26) # and we match only this "vendor type" value (8 bits). # # <ext-type>: NOTE: THIS OPTION IS NOT SUPPORTED PROPERLY YET!!!! # The attribute is interpreted as extended attribute (draft-ietf-radext-extended-attributes-08) # and we match only this "Ext-Type" value (16 bits). # This option should only be used with "CODE 26 VENDOR 0". # # Note that the Proxy-State (code 33) attribute is handled directly as an ECHO parameter by the gateway core. # Examples: # DROP code 18 ; # Reply-Message attribute, should not be included in requests # DROP code 26 vendor 9 ; # Drop any Cisco-specific attribute # ECHO code 26 vendor 0 ext 256 ; # Echo any extended attribute with the type 256.