Add 3GPP TS 29.234 V11.2.0 (2013-06) Add AVPs: - 3GPP-WLAN-APN-Id, OctetString, code 100, section 10.1.15 - Authentication-Method, Enumerated, code 300, section 10.1.5 - Authentication-Information-SIM, OctetString, code 301, section 10.1.6 - Authorization-Information-SIM, OctetString, code 302, section 10.1.7 - WLAN-User-Data, Grouped, code 303, section 10.1.8 - Charging-Data, Grouped, code 304, section 10.1.10 - WLAN-Access, Enumerated, code 305, section 10.1.11 - WLAN-3GPP-IP-Access, Enumerated, code 306, section 10.1.12 - APN-Authorized, Grouped, code 307, section 10.1.14 - APN-Barring-Type, Enumerated, code 309, section 10.1.16 - WLAN-Direct-IP-Access, Enumerated, code 310, section 10.1.17 - Session-Request-Type, Enumerated, code 311, section 10.1.23 - Routing-Policy, IPFilterRule, code 312, section 10.1.24 - Max-Requested-Bandwidth, OctetString, code 313, section 10.1.26 - Charging-Characteristics, Integer32, code 314, section 10.1.27 - Charging-Nodes, Grouped, code 315, section 10.1.28 - Primary-OCS-Charging-Function-Name, DiameterIdentity, code 316, section 10.1.29 - Secondary-OCS-Charging-Function-Name, DiameterIdentity, code 317, section 10.1.30 - Maximum-Number-Accesses, Unsigned32, code 319, section 10.1.38 APN-Id (308) OctetString only present from 3GPP TS 29.234 V6.2.0 (2005-03) to 3GPP TS 29.234 V6.4.0 (2005-09) before being deprecated in 3GPP TS 29.234 V6.5.0 (2005-12). (Not provided here.)

# This file contains information for configuring the rt_rewrite extension
# To find how to have freeDiameter load this extension, please refer to the freeDiameter documentation.
#
# The rt_rewrite extension allows moving data from one AVP into another one, or dropping AVPs altogether.

# This extension supports configuration reload at runtime. Send
# signal SIGUSR1 to the process to cause the process to reload its
# config.

# The config consists of MAP for AVP pairs of source/target, or DROP for a source.
#
#  MAP = "Source-AVP" > "Destination-AVP";
#
# It is possible to specify AVPs below GROUPED AVPs with the by separating AVPs with a colon (':'):
#  MAP = "Grouped-AVP1" : "Octetstring-AVP1" > "Grouped-AVP2" : "Grouped-AVP3" : "Octetstring-AVP2";
# Intermediate destination grouped AVPs will be created automatically.
#
# NOTE: you can not move grouped AVPs as a unit, you have to move each separate AVP.
# i.e., this will not work:
#  MAP = "Grouped-AVP1" > "Grouped-AVP2";
#
# For removing AVPs, use DROP:
#  DROP = "Grouped-AVP1" : "Octetstring-AVP1";