Update to 3GPP TS 29.212 V15.9.0 (2019-12) Update sections for various AVPs that were moved from section 5 to section 5a, 5b, or 5c. Add AVPs from 3GPP TS 29.212 V15.9.0 (2019-12): - Credit-Management-Status, Unsigned32, code 1082, section 5.3.102 - AN-GW-Status, Enumerated, code 2811, section 5.3.100 - User-Location-Info-Time, Time, code 2812, section 5.3.101 - CS-Service-Resource-Report, Grouped, code 2813, section E.6.3.6 - CS-Service-Resource-Failure-Cause, Enumerated, code 2814, section E.6.3.5 - CS-Service-Resource-Result-Operation, Enumerated, code 2815, section E.6.3.4 - Default-QoS-Information, Grouped, code 2816, section 5.3.103 - Default-QoS-Name, UTF8String, code 2817, section 5.3.104 - Conditional-APN-Aggregate-Max-Bitrate, Grouped, code 2818, section 5.3.105 - RAN-NAS-Release-Cause, OctetString, code 2819, section 5.3.106 - Presence-Reporting-Area-Elements-List, OctetString, code 2820, section 5.3.107 - Presence-Reporting-Area-Identifier, OctetString, code 2821, section 5.3.108 - Presence-Reporting-Area-Information, Grouped, code 2822, section 5.3.109 - Presence-Reporting-Area-Status, Unsigned32, code 2823, section 5.3.110 - NetLoc-Access-Support, Unsigned32, code 2824, section 5.3.111 - Fixed-User-Location-Info, Grouped, code 2825, section 5.3.112 - PCSCF-Restoration-Indication, Unsigned32, code 2826, section 5.3.113 - IP-CAN-Session-Charging-Scope, Enumerated, code 2827, section 5.3.114 - Monitoring-Flags, Unsigned32, code 2828, section 5.3.115 - Default-Access, Enumerated, code 2829, section 5.3.120 - NBIFOM-Mode, Enumerated, code 2830, section 5.3.117 - NBIFOM-Support, Enumerated, code 2831, section 5.3.116 - RAN-Rule-Support, Unsigned32, code 2832, section 5.3.122 - Access-Availability-Change-Reason, Unsigned32, code 2833, section 5.3.121 - Routing-Rule-Failure-Code, Unsigned32, code 2834, section 5.3.119 - Routing-Rule-Report, Grouped, code 2835, section 5.3.118 - Traffic-Steering-Policy-Identifier-DL, OctetString, code 2836, section 5.3.123 - Traffic-Steering-Policy-Identifier-UL, OctetString, code 2837, section 5.3.124 - Request-Type, Unsigned32, code 2838, section 5c.3.2 - Execution-Time, Time, code 2839, section 5.3.127 - Conditional-Policy-Information, Grouped, code 2840, section 5.3.128 - Resource-Release-Notification, Enumerated, code 2841, section 5.3.125 - Removal-Of-Access, Enumerated, code 2842, section 5.3.126 - TCP-Source-Port, Unsigned32, code 2843, section 5.3.129 - Default-Bearer-Indication, Enumerated, code 2844, section 5.3.132 - PRA-Install, Grouped, code 2845, section 5.3.130 - PRA-Remove, Grouped, code 2846, section 5.3.131 - 3GPP-PS-Data-Off-Status, Enumerated, code 2847, section 5.3.133 - Extended-APN-AMBR-DL, Unsigned32, code 2848, section 5.3.134 - Extended-APN-AMBR-UL, Unsigned32, code 2849, section 5.3.135 - Extended-GBR-DL, Unsigned32, code 2850, section 5.3.136 - Extended-GBR-UL, Unsigned32, code 2851, section 5.3.137 - Max-PLR-DL, Float32, code 2852, section 5.3.138 - Max-PLR-UL, Float32, code 2853, section 5.3.139 - UE-Status, Unsigned32, code 2854, section 5.3.140 - Presence-Reporting-Area-Node, Unsigned32, code 2855, section 5.3.141 Set Must AVP Flag M (Mandatory) per 3GPP TS 29.212 Table 5b.3.0.1 for: - ADC-Rule-Install, Grouped, code 1092, section 5b.3.1 - ADC-Rule-Remove, Grouped, code 1093, section 5b.3.2 - ADC-Rule-Definition, Grouped, code 1094, section 5b.3.3 - ADC-Rule-Base-Name, UTF8String, code 1095, section 5b.3.4 - ADC-Rule-Name, OctetString, code 1096, section 5b.3.5 - ADC-Rule-Report, Grouped, code 1097, section 5b.3.6 Retain ADC-Revalidation-Time, Time, code 2801, section 5.3.93 Removed in 3GPP TS 29.212 V12.1.0 (2013-06). Add HeNB-BBF-FQDN, UTF8String, code 2803, section 5.3.94 Removed in 3GPP TS 29.212 V11.8.0 (2013-03).

This package uses CMake (cmake.org) as building system. You'll need the cmake tool in order 
to generate the Makefiles for your platform. You can also select which extensions must be built
with cmake. After the initial cmake configuration, you will need several tools such as make, a 
C compiler (tested mostly with gcc), flex (> 2.5.4), bison, ...

You may retrieve the source package in several ways:
 - as a pre-packaged version for your platform. Check the website for supported platforms.
 - as a tarball containing the source.
 - directly from the repository using Mercurial tool:
      hg clone http://www.freediameter.net/hg/freeDiameter
   In order to update later:
      hg pull -u

Building in a separate directory is recommended:
# mkdir build
# cd build
# cmake ../
# make

You can pass options to instruct cmake about which components to compile on the command-line.
You can also use a CMake front-end (for example ccmake or cmake-gui). 
If your cmake installation is recent, the edit_cache target is a good help as well:
# mkdir build
# cd build
# cmake ../
# make help
# make edit_cache
# make

You can disable the unit tests by doing:
# cmake -DBUILD_TESTING:BOOL=OFF ../
# make

When the tests are enabled, you can run them with:
# make test

See the INSTALL.* files for additional platform-specific information.
Note that the most up-to-date INSTALL file is the Ubuntu one. You may want to read there
in addition to your own platform file.