Mercurial > hg > freeDiameter
view doc/app_radgw.conf.sample @ 1492:fadf8947c0fb
Add 3GPP TS 29.172 V15.2.0 (2019-12)
Add AVPs from 3GPP TS 29.172:
- SLg-Location-Type, Enumerated, code 2500, section 7.4.2
- LCS-EPS-Client-Name, Grouped, code 2501, section 7.4.3
- LCS-Requestor-Name, Grouped, code 2502, section 7.4.4
- LCS-Priority, Unsigned32, code 2503, section 7.4.5
- LCS-QoS, Grouped, code 2504, section 7.4.6
- Horizontal-Accuracy, Unsigned32, code 2505, section 7.4.7
- Vertical-Accuracy, Unsigned32, code 2506, section 7.4.8
- Vertical-Requested, Enumerated, code 2507, section 7.4.9
- Velocity-Requested, Enumerated, code 2508, section 7.4.10
- Response-Time, Enumerated, code 2509, section 7.4.11
- Supported-GAD-Shapes, Unsigned32, code 2510, section 7.4.12
- LCS-Codeword, UTF8String, code 2511, section 7.4.13
- LCS-Privacy-Check, Enumerated, code 2512, section 7.4.14
- Accuracy-Fulfilment-Indicator, Enumerated, code 2513, section 7.4.15
- Age-Of-Location-Estimate, Unsigned32, code 2514, section 7.4.16
- Velocity-Estimate, OctetString, code 2515, section 7.4.17
- EUTRAN-Positioning-Data, OctetString, code 2516, section 7.4.18
- ECGI, OctetString, code 2517, section 7.4.19
- Location-Event, Enumerated, code 2518, section 7.4.20
- Pseudonym-Indicator, Enumerated, code 2519, section 7.4.21
- LCS-Service-Type-ID, Unsigned32, code 2520, section 7.4.22
- LCS-Privacy-Check-Non-Session, Grouped, code 2521, section 7.4.23
- LCS-Privacy-Check-Session, Grouped, code 2522, section 7.4.24
- LCS-QoS-Class, Enumerated, code 2523, section 7.4.27
- GERAN-Positioning-Info, Grouped, code 2524, section 7.4.29
- GERAN-Positioning-Data, OctetString, code 2525, section 7.4.30
- GERAN-GANSS-Positioning-Data, OctetString, code 2526, section 7.4.31
- UTRAN-Positioning-Info, Grouped, code 2527, section 7.4.32
- UTRAN-Positioning-Data, OctetString, code 2528, section 7.4.33
- UTRAN-GANSS-Positioning-Data, OctetString, code 2529, section 7.4.34
- LRR-Flags, Unsigned32, code 2530, section 7.4.35
- LCS-Reference-Number, OctetString, code 2531, section 7.4.37
- Deferred-Location-Type, Unsigned32, code 2532, section 7.4.36
- Area-Event-Info, Grouped, code 2533, section 7.4.38
- Area-Definition, Grouped, code 2534, section 7.4.39
- Area, Grouped, code 2535, section 7.4.40
- Area-Type, Unsigned32, code 2536, section 7.4.41
- Area-Identification, Grouped, code 2537, section 7.4.42
- Occurrence-Info, Enumerated, code 2538, section 7.4.43
- Interval-Time, Unsigned32, code 2539, section 7.4.44
- Periodic-LDR-Information, Grouped, code 2540, section 7.4.45
- Reporting-Amount, Unsigned32, code 2541, section 7.4.46
- Reporting-Interval, Unsigned32, code 2542, section 7.4.47
- Reporting-PLMN-List, Grouped, code 2543, section 7.4.48
- PLMN-ID-List, Grouped, code 2544, section 7.4.49
- PLR-Flags, Unsigned32, code 2545, section 7.4.52
- PLA-Flags, Unsigned32, code 2546, section 7.4.53
- Deferred-MT-LR-Data, Grouped, code 2547, section 7.4.54
- Termination-Cause, Unsigned32, code 2548, section 7.4.55
- LRA-Flags, Unsigned32, code 2549, section 7.4.56
- Periodic-Location-Support-Indicator, Enumerated, code 2550, section 7.4.50
- Prioritized-List-Indicator, Enumerated, code 2551, section 7.4.51
- ESMLC-Cell-Info, Grouped, code 2552, section 7.4.57
- Cell-Portion-ID, Unsigned32, code 2553, section 7.4.58
- 1xRTT-RCID, OctetString, code 2554, section 7.4.59
- Delayed-Location-Reporting-Data, Grouped, code 2555, section 7.4.60
- Civic-Address, UTF8String, code 2556, section 7.4.61
- Barometric-Pressure, Unsigned32, code 2557, section 7.4.62
- UTRAN-Additional-Positioning-Data, OctetString, code 2558, section 7.4.63
- Motion-Event-Info, Grouped, code 2559, section 7.4.64
- Linear-Distance, Unsigned32, code 2560, section 7.4.65
- Maximum-Interval, Unsigned32, code 2561, section 7.4.66
- Sampling-Interval, Unsigned32, code 2562, section 7.4.67
- Reporting-Duration, Unsigned32, code 2563, section 7.4.68
- Reporting-Location-Requirements, Unsigned32, code 2564, section 7.4.69
- Additional-Area, Grouped, code 2565, section 7.4.70
author | Luke Mewburn <luke@mewburn.net> |
---|---|
date | Mon, 30 Mar 2020 12:38:31 +1100 |
parents | 6fe3e5cf9fb2 |
children |
line wrap: on
line source
# This file contains information for configuring the app_radgw extension. # To find how to have freeDiameter load this extension, please refer to the freeDiameter documentation. # # The app_radgw extension allows a freeDiameter agent to serve as a # RADIUS/Diameter gateway. Typically, a RADIUS client (e.g. a NAS) will connect to # this agent, and the message will be converted to Diameter and sent to a Diameter server. # # Note that this extension does not provide a fully functionnal RADIUS/Diameter gateway. # You need to load plugins to handle specific RADIUS messages and convert them to # Diameter apps such as NASREQ, EAP, ... See the next section for information. ########### # PLUGINS # ########### # Additional plugins must be loaded to support specific RADIUS messages and attributes. # Plugins are registered either for every message, or by port (auth or acct), or by port and code. # The general format is: # RGWX = plugin [: conf_file] [: port] [: code(s)] ; # Where: # plugin is the quoted file name (relative or absolute) of the plugin to load (.rgwx files). # conf_file (optional) is the quoted name of the configuration file. # port (optional), either auth or acct. # If not specified, extension is called for messages incoming on both ports # code(s): space-separated list of command codes for which this extension must be called. # If not specified, the extension is called for all incoming messages. # The values are interpreted as hexadecimal. # # The plugins are called in the order they appear in this file. # Here are some explained examples: # RGWX = "3579.rgwx"; Load this extension and call it for all messages. No configuration file. # RGWX = "3579.rgwx" : "3579.conf"; Same as previous but with a configuration file specified. # RGWX = "3579.rgwx" : auth; No configuration file, but called only for RADIUS messages received on authentication port. # RGWX = "3579.rgwx" : 4 8 b; Called for messages with command code 4, 8, or 11 only. # RGWX = "3579.rgwx" : "3579.conf" : auth : 4 8 b; All parameters combined. # Once the list of extensions for an incoming message has been called (or if the list is empty), # an error is logged if some RADIUS attributes of the message have not been handled. RGWX = "extensions/echodrop.rgwx" : "echodrop.rgwx.conf"; # See echodrop.rgwx.conf.sample file RGWX = "extensions/auth.rgwx" : auth; RGWX = "extensions/acct.rgwx" : acct; # RGWX = "extensions/debug.rgwx"; # Uncomment to see the result of the translation plugins. # For some extensions (auth, acct), a false configuration file name # can be passed to specify flags, such as "nonai" to ignore NAI-based routing. ################## # RADIUS Clients # ################## # Each RADIUS client must be declared in the form: # nas = IP / shared-secret ; # IP can be ipv4 or ipv6 # port can be additionaly restricted with brackets: IP[port] (ex: 192.168.0.1[1812]) # shared-secret can be a quoted string, or a list of hexadecimal values. # examples: # nas = 192.168.100.1 / "secret key" ; # the shared secret buffer is 0x736563726574206b6579 (length 10 bytes) # nas = fe00::1 / 73 65 63 72 65 74 20 6b 65 79; # same shared secret as previously # When a packet is received from an IP not declared here, it is discarded. # If the RADIUS client is a Proxy that forwards messages from different peers, it must be # declared instead as follow: # pxy = IP / shared-secret ; # Note that it is not recommended to use this gateway implementation with a proxy currently, # since the management of duplicate messages might be insufficient. # The old notation cli = ... is equivalent to nas = ... and kept for backward compatibility. #################### # Authentication # # Authorization # #################### # Enable the RADIUS/Diameter authentication/authorization gateway? # auth_server_enable = 1; # The port on which the accounting server listens # auth_server_port = 1812; # The IPv4 on which to bind the server, or "disable" if IPv4 must not be used. # auth_server_ip4 = 0.0.0.0; # The IPv6 address to which the server is bound, or "disable" # auth_server_ip6 = :: ; ################ # Accounting # ################ # Enable the RADIUS/Diameter accounting gateway? # acct_server_enable = 1; # The port on which the accounting server listens # acct_server_port = 1813; # The IPv4 on which to bind the server, or "disable" if no IPv4 is wanted. # acct_server_ip4 = 0.0.0.0; # The IPv6 address to which the server is bound, or "disable" # acct_server_ip6 = :: ;