Mercurial > hg > freeDiameter
annotate INSTALL @ 1513:73e563165594
Add 3GPP TS 29.468 V15.8.0 (2019-12)
Add AVPs:
- BMSC-Address, Address, code 3500, section 6.4.2
- BMSC-Port, Unsigned32, code 3501, section 6.4.3
- Common-Tunnel-Endpoint-Identifier, OctetString, code 3524, section 6.4.26
- FEC-Request, OctetString, code 3525, section 6.4.27
- FEC-Result, Unsigned32, code 3531, section 6.4.33
- Local-M1-Information, Grouped, code 3518, section 6.4.20
- Local-MB2-U-Information, Grouped, code 3519, section 6.4.21
- MB2U-Security, Unsigned32, code 3517, section 6.4.19
- MBMS-Bearer-Event, Unsigned32, code 3502, section 6.4.4
- MBMS-Bearer-Event-Notification, Grouped, code 3503, section 6.4.5
- MBMS-Bearer-Request, Grouped, code 3504, section 6.4.6
- MBMS-Bearer-Response, Grouped, code 3505, section 6.4.7
- MBMS-Bearer-Result, Unsigned32, code 3506, section 6.4.8
- MBMS-eNB-IP-Multicast-Address, Address, code 3520, section 6.4.22
- MBMS-eNB-IPv6-Multicast-Address, Address, code 3521, section 6.4.23
- MBMS-GW-SSM-IP-Address-29.468, Address, code 3522, section 6.4.24
- MBMS-GW-SSM-IPv6-Address-29.468, Address, code 3523, section 6.4.25
- MBMS-Start-Time, Time, code 3507, section 6.4.9
- Radio-Frequency-29.468, Unsigned32, code 3508, section 6.4.10
- ROHC-Full-Header-Periodicity, Float32, code 3527, section 6.4.29
- ROHC-Max-CID, Unsigned32, code 3532, section 6.4.34
- ROHC-Profile, Unsigned32, code 3528, section 6.4.30
- ROHC-Request, Grouped, code 3526, section 6.4.28
- ROHC-Result, Unsigned32, code 3530, section 6.4.32
- TMGI-Allocation-Request, Grouped, code 3509, section 6.4.11
- TMGI-Allocation-Response, Grouped, code 3510, section 6.4.12
- TMGI-Allocation-Result, Unsigned32, code 3511, section 6.4.13
- TMGI-Deallocation-Request, Grouped, code 3512, section 6.4.14
- TMGI-Deallocation-Response, Grouped, code 3513, section 6.4.15
- TMGI-Deallocation-Result, Unsigned32, code 3514, section 6.4.16
- TMGI-Expiry, Grouped, code 3515, section 6.4.17
- TMGI-Number, Unsigned32, code 3516, section 6.4.18
- Userplane-Protocol-Result, Grouped, code 3529, section 6.4.31
Note: Name conflict with 3GPP TS 29.061 MBMS-GW-SSM-IP-Address (924).
3GPP TS 29.061 V10.4.0 (2011-09) CR 0355 added MBMS-GW-SSM-IP-Address (924).
3GPP TS 29.468 V14.0.0 (2016-12) CR 0021 added MBMS-GW-SSM-IP-Address (3522).
Fix: MBMS-GW-SSM-IP-Address (3522) renamed to MBMS-GW-SSM-IP-Address-29.468 (3522).
Note: Name conflict with 3GPP TS 29.061 MBMS-GW-SSM-IPv6-Address (925).
3GPP TS 29.061 V10.4.0 (2011-09) CR 0355 added MBMS-GW-SSM-IPv6-Address (925).
3GPP TS 29.468 V14.0.0 (2016-12) CR 0021 added MBMS-GW-SSM-IPv6-Address (3523).
Fix: MBMS-GW-SSM-IPv6-Address (3523) renamed to MBMS-GW-SSM-IPv6-Address-29.468 (3523).
Note: Name conflict with 3GPP TS 32.299 Radio-Frequency (3462).
3GPP TS 29.468 V12.0.0 (2014-09) added Radio-Frequency (3508).
3GPP TS 32.299 V13.1.0 (2015-06) CR 0638 added Radio-Frequency (3462).
Fix: Radio-Frequency (3508) renamed to Radio-Frequency-29.468 (3508).
author | Luke Mewburn <luke@mewburn.net> |
---|---|
date | Tue, 07 Apr 2020 19:38:33 +1000 |
parents | e457e7ac3a6d |
children |
rev | line source |
---|---|
0 | 1 This package uses CMake (cmake.org) as building system. You'll need the cmake tool in order |
643
f065e3cb846e
Updated documentation
Sebastien Decugis <sdecugis@nict.go.jp>
parents:
341
diff
changeset
|
2 to generate the Makefiles for your platform. You can also select which extensions must be built |
f065e3cb846e
Updated documentation
Sebastien Decugis <sdecugis@nict.go.jp>
parents:
341
diff
changeset
|
3 with cmake. After the initial cmake configuration, you will need several tools such as make, a |
811
edb5228bd753
Added instructions for many *BSD systems, thanks to Thomas Klausner for the inputs
Sebastien Decugis <sdecugis@freediameter.net>
parents:
660
diff
changeset
|
4 C compiler (tested mostly with gcc), flex (> 2.5.4), bison, ... |
643
f065e3cb846e
Updated documentation
Sebastien Decugis <sdecugis@nict.go.jp>
parents:
341
diff
changeset
|
5 |
f065e3cb846e
Updated documentation
Sebastien Decugis <sdecugis@nict.go.jp>
parents:
341
diff
changeset
|
6 You may retrieve the source package in several ways: |
f065e3cb846e
Updated documentation
Sebastien Decugis <sdecugis@nict.go.jp>
parents:
341
diff
changeset
|
7 - as a pre-packaged version for your platform. Check the website for supported platforms. |
f065e3cb846e
Updated documentation
Sebastien Decugis <sdecugis@nict.go.jp>
parents:
341
diff
changeset
|
8 - as a tarball containing the source. |
f065e3cb846e
Updated documentation
Sebastien Decugis <sdecugis@nict.go.jp>
parents:
341
diff
changeset
|
9 - directly from the repository using Mercurial tool: |
f065e3cb846e
Updated documentation
Sebastien Decugis <sdecugis@nict.go.jp>
parents:
341
diff
changeset
|
10 hg clone http://www.freediameter.net/hg/freeDiameter |
f065e3cb846e
Updated documentation
Sebastien Decugis <sdecugis@nict.go.jp>
parents:
341
diff
changeset
|
11 In order to update later: |
f065e3cb846e
Updated documentation
Sebastien Decugis <sdecugis@nict.go.jp>
parents:
341
diff
changeset
|
12 hg pull -u |
0 | 13 |
14 Building in a separate directory is recommended: | |
304
ad3c46016584
Added install directives for cmake; also allow default directory to seek for extensions and configuration files
Sebastien Decugis <sdecugis@nict.go.jp>
parents:
300
diff
changeset
|
15 # mkdir build |
ad3c46016584
Added install directives for cmake; also allow default directory to seek for extensions and configuration files
Sebastien Decugis <sdecugis@nict.go.jp>
parents:
300
diff
changeset
|
16 # cd build |
ad3c46016584
Added install directives for cmake; also allow default directory to seek for extensions and configuration files
Sebastien Decugis <sdecugis@nict.go.jp>
parents:
300
diff
changeset
|
17 # cmake ../ |
ad3c46016584
Added install directives for cmake; also allow default directory to seek for extensions and configuration files
Sebastien Decugis <sdecugis@nict.go.jp>
parents:
300
diff
changeset
|
18 # make |
ad3c46016584
Added install directives for cmake; also allow default directory to seek for extensions and configuration files
Sebastien Decugis <sdecugis@nict.go.jp>
parents:
300
diff
changeset
|
19 |
325
5133b45e3305
Updated documentation
Sebastien Decugis <sdecugis@nict.go.jp>
parents:
304
diff
changeset
|
20 You can pass options to instruct cmake about which components to compile on the command-line. |
643
f065e3cb846e
Updated documentation
Sebastien Decugis <sdecugis@nict.go.jp>
parents:
341
diff
changeset
|
21 You can also use a CMake front-end (for example ccmake or cmake-gui). |
325
5133b45e3305
Updated documentation
Sebastien Decugis <sdecugis@nict.go.jp>
parents:
304
diff
changeset
|
22 If your cmake installation is recent, the edit_cache target is a good help as well: |
304
ad3c46016584
Added install directives for cmake; also allow default directory to seek for extensions and configuration files
Sebastien Decugis <sdecugis@nict.go.jp>
parents:
300
diff
changeset
|
23 # mkdir build |
ad3c46016584
Added install directives for cmake; also allow default directory to seek for extensions and configuration files
Sebastien Decugis <sdecugis@nict.go.jp>
parents:
300
diff
changeset
|
24 # cd build |
ad3c46016584
Added install directives for cmake; also allow default directory to seek for extensions and configuration files
Sebastien Decugis <sdecugis@nict.go.jp>
parents:
300
diff
changeset
|
25 # cmake ../ |
325
5133b45e3305
Updated documentation
Sebastien Decugis <sdecugis@nict.go.jp>
parents:
304
diff
changeset
|
26 # make help |
304
ad3c46016584
Added install directives for cmake; also allow default directory to seek for extensions and configuration files
Sebastien Decugis <sdecugis@nict.go.jp>
parents:
300
diff
changeset
|
27 # make edit_cache |
ad3c46016584
Added install directives for cmake; also allow default directory to seek for extensions and configuration files
Sebastien Decugis <sdecugis@nict.go.jp>
parents:
300
diff
changeset
|
28 # make |
ad3c46016584
Added install directives for cmake; also allow default directory to seek for extensions and configuration files
Sebastien Decugis <sdecugis@nict.go.jp>
parents:
300
diff
changeset
|
29 |
341
2bf23d10bc6f
Change the test system to use ctest more efficiently
Sebastien Decugis <sdecugis@nict.go.jp>
parents:
325
diff
changeset
|
30 You can disable the unit tests by doing: |
2bf23d10bc6f
Change the test system to use ctest more efficiently
Sebastien Decugis <sdecugis@nict.go.jp>
parents:
325
diff
changeset
|
31 # cmake -DBUILD_TESTING:BOOL=OFF ../ |
304
ad3c46016584
Added install directives for cmake; also allow default directory to seek for extensions and configuration files
Sebastien Decugis <sdecugis@nict.go.jp>
parents:
300
diff
changeset
|
32 # make |
643
f065e3cb846e
Updated documentation
Sebastien Decugis <sdecugis@nict.go.jp>
parents:
341
diff
changeset
|
33 |
660
a8269458d5b1
Updated documentation
Sebastien Decugis <sdecugis@nict.go.jp>
parents:
643
diff
changeset
|
34 When the tests are enabled, you can run them with: |
866 | 35 # make test |
0 | 36 |
643
f065e3cb846e
Updated documentation
Sebastien Decugis <sdecugis@nict.go.jp>
parents:
341
diff
changeset
|
37 See the INSTALL.* files for additional platform-specific information. |
f065e3cb846e
Updated documentation
Sebastien Decugis <sdecugis@nict.go.jp>
parents:
341
diff
changeset
|
38 Note that the most up-to-date INSTALL file is the Ubuntu one. You may want to read there |
f065e3cb846e
Updated documentation
Sebastien Decugis <sdecugis@nict.go.jp>
parents:
341
diff
changeset
|
39 in addition to your own platform file. |