Add 3GPP TS 29.468 V15.8.0 (2019-12) Add AVPs: - BMSC-Address, Address, code 3500, section 6.4.2 - BMSC-Port, Unsigned32, code 3501, section 6.4.3 - Common-Tunnel-Endpoint-Identifier, OctetString, code 3524, section 6.4.26 - FEC-Request, OctetString, code 3525, section 6.4.27 - FEC-Result, Unsigned32, code 3531, section 6.4.33 - Local-M1-Information, Grouped, code 3518, section 6.4.20 - Local-MB2-U-Information, Grouped, code 3519, section 6.4.21 - MB2U-Security, Unsigned32, code 3517, section 6.4.19 - MBMS-Bearer-Event, Unsigned32, code 3502, section 6.4.4 - MBMS-Bearer-Event-Notification, Grouped, code 3503, section 6.4.5 - MBMS-Bearer-Request, Grouped, code 3504, section 6.4.6 - MBMS-Bearer-Response, Grouped, code 3505, section 6.4.7 - MBMS-Bearer-Result, Unsigned32, code 3506, section 6.4.8 - MBMS-eNB-IP-Multicast-Address, Address, code 3520, section 6.4.22 - MBMS-eNB-IPv6-Multicast-Address, Address, code 3521, section 6.4.23 - MBMS-GW-SSM-IP-Address-29.468, Address, code 3522, section 6.4.24 - MBMS-GW-SSM-IPv6-Address-29.468, Address, code 3523, section 6.4.25 - MBMS-Start-Time, Time, code 3507, section 6.4.9 - Radio-Frequency-29.468, Unsigned32, code 3508, section 6.4.10 - ROHC-Full-Header-Periodicity, Float32, code 3527, section 6.4.29 - ROHC-Max-CID, Unsigned32, code 3532, section 6.4.34 - ROHC-Profile, Unsigned32, code 3528, section 6.4.30 - ROHC-Request, Grouped, code 3526, section 6.4.28 - ROHC-Result, Unsigned32, code 3530, section 6.4.32 - TMGI-Allocation-Request, Grouped, code 3509, section 6.4.11 - TMGI-Allocation-Response, Grouped, code 3510, section 6.4.12 - TMGI-Allocation-Result, Unsigned32, code 3511, section 6.4.13 - TMGI-Deallocation-Request, Grouped, code 3512, section 6.4.14 - TMGI-Deallocation-Response, Grouped, code 3513, section 6.4.15 - TMGI-Deallocation-Result, Unsigned32, code 3514, section 6.4.16 - TMGI-Expiry, Grouped, code 3515, section 6.4.17 - TMGI-Number, Unsigned32, code 3516, section 6.4.18 - Userplane-Protocol-Result, Grouped, code 3529, section 6.4.31 Note: Name conflict with 3GPP TS 29.061 MBMS-GW-SSM-IP-Address (924). 3GPP TS 29.061 V10.4.0 (2011-09) CR 0355 added MBMS-GW-SSM-IP-Address (924). 3GPP TS 29.468 V14.0.0 (2016-12) CR 0021 added MBMS-GW-SSM-IP-Address (3522). Fix: MBMS-GW-SSM-IP-Address (3522) renamed to MBMS-GW-SSM-IP-Address-29.468 (3522). Note: Name conflict with 3GPP TS 29.061 MBMS-GW-SSM-IPv6-Address (925). 3GPP TS 29.061 V10.4.0 (2011-09) CR 0355 added MBMS-GW-SSM-IPv6-Address (925). 3GPP TS 29.468 V14.0.0 (2016-12) CR 0021 added MBMS-GW-SSM-IPv6-Address (3523). Fix: MBMS-GW-SSM-IPv6-Address (3523) renamed to MBMS-GW-SSM-IPv6-Address-29.468 (3523). Note: Name conflict with 3GPP TS 32.299 Radio-Frequency (3462). 3GPP TS 29.468 V12.0.0 (2014-09) added Radio-Frequency (3508). 3GPP TS 32.299 V13.1.0 (2015-06) CR 0638 added Radio-Frequency (3462). Fix: Radio-Frequency (3508) renamed to Radio-Frequency-29.468 (3508).

This package uses CMake (cmake.org) as building system. You'll need the cmake tool in order 
to generate the Makefiles for your platform. You can also select which extensions must be built
with cmake. After the initial cmake configuration, you will need several tools such as make, a 
C compiler (tested mostly with gcc), flex (> 2.5.4), bison, ...

You may retrieve the source package in several ways:
 - as a pre-packaged version for your platform. Check the website for supported platforms.
 - as a tarball containing the source.
 - directly from the repository using Mercurial tool:
      hg clone http://www.freediameter.net/hg/freeDiameter
   In order to update later:
      hg pull -u

Building in a separate directory is recommended:
# mkdir build
# cd build
# cmake ../
# make

You can pass options to instruct cmake about which components to compile on the command-line.
You can also use a CMake front-end (for example ccmake or cmake-gui). 
If your cmake installation is recent, the edit_cache target is a good help as well:
# mkdir build
# cd build
# cmake ../
# make help
# make edit_cache
# make

You can disable the unit tests by doing:
# cmake -DBUILD_TESTING:BOOL=OFF ../
# make

When the tests are enabled, you can run them with:
# make test

See the INSTALL.* files for additional platform-specific information.
Note that the most up-to-date INSTALL file is the Ubuntu one. You may want to read there
in addition to your own platform file.