Mercurial > hg > freeDiameter
comparison contrib/OpenWRT/others/D-Link_DIR-330_netconfig.patch @ 488:b81732a92223
Patch to get a working WAN interface on D-Link DIR-330 routeur with OpenWRT. Wireless still not good.
| author | Sebastien Decugis <sdecugis@nict.go.jp> |
|---|---|
| date | Thu, 12 Aug 2010 14:26:22 +0900 |
| parents | |
| children |
comparison
equal
deleted
inserted
replaced
| 487:a12df8c6c745 | 488:b81732a92223 |
|---|---|
| 1 diff --git a/target/linux/brcm47xx/base-files/etc/init.d/netconfig b/target/linux/brcm47xx/base-files/etc/init.d/netconfig | |
| 2 index d7839b6..6446483 100755 | |
| 3 --- a/target/linux/brcm47xx/base-files/etc/init.d/netconfig | |
| 4 +++ b/target/linux/brcm47xx/base-files/etc/init.d/netconfig | |
| 5 @@ -150,6 +150,30 @@ start() { | |
| 6 } | |
| 7 } | |
| 8 } | |
| 9 + if (model == "D-Link DIR-330") { # boardtype is 0x0472, so we need to reset the parameters | |
| 10 + # The switch is on eth1, this script defaults to switch on eth0, so we write the values directly instead. | |
| 11 + print "#### DIR-330: eth1 must be up for configuring the switch " | |
| 12 + print "config interface switchport" | |
| 13 + print " option ifname \"eth1\"" | |
| 14 + print " option proto none" | |
| 15 + print "" | |
| 16 + print "config switch eth1" | |
| 17 + print " option enable 1" | |
| 18 + print "" | |
| 19 + print "config switch_vlan eth1_0" | |
| 20 + print " option device \"eth1\"" | |
| 21 + print " option vlan 0" | |
| 22 + print " option ports \"0 1 2 3 5t\"" | |
| 23 + print "" | |
| 24 + print "config switch_vlan eth1_1" | |
| 25 + print " option device \"eth1\"" | |
| 26 + print " option vlan 1" | |
| 27 + print " option ports \"4 5t\"" | |
| 28 + print "" | |
| 29 + c["lan_ifname"] = "eth0.0" | |
| 30 + c["wan_ifname"] = "eth0.1" | |
| 31 + } | |
| 32 + | |
| 33 # Buffalo WBR-B11 and Buffalo WBR-G54 | |
| 34 if (nvram["boardtype"] == "bcm94710ap") { | |
| 35 c["vlan0ports"] = "0 1 2 3 4 5u" |