Mercurial > hg > freeDiameter
changeset 488:b81732a92223
Patch to get a working WAN interface on D-Link DIR-330 routeur with OpenWRT. Wireless still not good.
| author | Sebastien Decugis <sdecugis@nict.go.jp> |
|---|---|
| date | Thu, 12 Aug 2010 14:26:22 +0900 |
| parents | a12df8c6c745 |
| children | 70254d9f8909 |
| files | contrib/OpenWRT/others/D-Link_DIR-330_netconfig.patch |
| diffstat | 1 files changed, 35 insertions(+), 0 deletions(-) [+] |
line wrap: on
line diff
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/contrib/OpenWRT/others/D-Link_DIR-330_netconfig.patch Thu Aug 12 14:26:22 2010 +0900 @@ -0,0 +1,35 @@ +diff --git a/target/linux/brcm47xx/base-files/etc/init.d/netconfig b/target/linux/brcm47xx/base-files/etc/init.d/netconfig +index d7839b6..6446483 100755 +--- a/target/linux/brcm47xx/base-files/etc/init.d/netconfig ++++ b/target/linux/brcm47xx/base-files/etc/init.d/netconfig +@@ -150,6 +150,30 @@ start() { + } + } + } ++ if (model == "D-Link DIR-330") { # boardtype is 0x0472, so we need to reset the parameters ++ # The switch is on eth1, this script defaults to switch on eth0, so we write the values directly instead. ++ print "#### DIR-330: eth1 must be up for configuring the switch " ++ print "config interface switchport" ++ print " option ifname \"eth1\"" ++ print " option proto none" ++ print "" ++ print "config switch eth1" ++ print " option enable 1" ++ print "" ++ print "config switch_vlan eth1_0" ++ print " option device \"eth1\"" ++ print " option vlan 0" ++ print " option ports \"0 1 2 3 5t\"" ++ print "" ++ print "config switch_vlan eth1_1" ++ print " option device \"eth1\"" ++ print " option vlan 1" ++ print " option ports \"4 5t\"" ++ print "" ++ c["lan_ifname"] = "eth0.0" ++ c["wan_ifname"] = "eth0.1" ++ } ++ + # Buffalo WBR-B11 and Buffalo WBR-G54 + if (nvram["boardtype"] == "bcm94710ap") { + c["vlan0ports"] = "0 1 2 3 4 5u"